Recent content by JimboJJ

Re: Pickup wiring help Thanks Tele, I’m “picking up what you’re laying down,” so to speak...somewhat. I admit I’m not sure why most of the time one of the terminals on the variable resistors is grounded. I have to mess around with one with my ohmmeter to figure that out. But I found this...

Re: Pickup wiring help I probably spend way too much time browsing wiring diagrams on the net, but now THIS is how I think I’ll start wiring it. I’m fairly sure I will end up re-wiring it to something else though. I want it to be versatile and have a lot of different possible sound combinations.

Re: Pickup wiring help I’m waiting for this nitro clear gloss laquer to dry before spraying a few more coats and then waiting some more for a polish. As I wait I’m trying to figure out how I will wire the thing.

Re: Pickup wiring help [ Had some time while waiting for parts and thought I’d see if I could design something a bit more usable. This way, if I drew it up right, I could add the bridge pickup to the mix by pulling the tone pot, and killing all signal by pulling the volume pot. That, and...

Re: Pickup wiring help Is this wiring scheme possible, but with three humbuckers and a five way selector? How would I change it up for three pickups? Would it be possible to switch all three pickups from series to parallel with one PP pot, and all three to out of phase with one PP pot?

Re: Pickup wiring help This is what I was thinking of doing...do you guys think it will work? Those are DPDT on off on miniswitches.

Re: Pickup wiring help Here’s another one.

Re: Pickup wiring help I was thinking like this so I could choose between north and south coils with both in the middle. Think it would work? Edit--Looks almost identical to your picture, except you are using the second pole/ side. After looking at them both I think I’ll try mine because I...

Hi, I’m newly registered here but have been lurking around for quite a while browsing posts. Looking for help with a pickup wiring diagram for an RG Ibanez currently with HSS setup and cutouts—one tone, one volume pot, 5 position blade switch. I have checked here and elsewhere online and came...