Recent content by jonathane40

  1. jonathane40

    Help wiring Jazzmaster with a Free-Way 6 position toggle switch!

    Recently I got a Squier Jazzmaster and am planing on replacing the electronics and pickups to Antiquities as well as shielding the entire cavity. I really like to keep the Rhythm circuit as well and add a treble bleed mod. A few days ago I learned about the Free-Way 3X3-05 6 position toggle...
  2. jonathane40

    Antiquity Surfer va Antiquity Mustang (neck)

    Hi, I’m looking for a replacement for the neck pickup of a Kurt Cobain mustang and was wondering how are these two pickups different in sound. Which would be brighter, darker, etc? Both use Alnico 5, Antiquity Mustang (6.6 DCR) and Surfer (6.5 DCR), and Mustang has flat poleoieces. How would...
  3. jonathane40

    Neck recommendation for Kurt Cobain Mustang

    Hi, I have a KC Mustang epithet a JB in the bridge and love the humbucker. However, I am not loving the neck so much. I have been looking at some of the stack pickups as they don't have any hum. I have used the Classic Stack Plus on a HSS strat along with a JB in the bridge and that worked...
  4. jonathane40

    Split humbucker wiring. Need help!

    Hi guys, I have a two humbucker tele with a 3-way switch, a regular volume pot and a push/pull pot (that when pulled, both humbuckers turn into single coil mode). It has an unbranded neck pickup and an SD JB in the bridge. The JB has the Green and Bare soldered to ground, Red and White to the...
  5. jonathane40

    Fender Mustang wiring modification

    Hi, I just got a Kurt Cobain Mustang and like it a lot! It plays very solid and the pickups sound very nice, specially the JB. The neck will probably be replaced with either an Antiquity/Novak or a Seymour Duncan Classic Stack Plus. However, that will be later. For now I want to modify the two...
  6. jonathane40

    WTB: Lollar Imperial Neck (low wind) and Bridge (normal wind) 4 conductor for both

    Hi, I am looking for these pickups and am willing to pay as much as $115 for each. Thanks!
  7. jonathane40

    FS/FT: Taylor SolidBody Standard

    The guitar is great cosmetically and it has recently been set-up by a professional. Since it has been in my care, it hasn’t left my smoke-free apartment. Pictures are included at the end. Prices include shipping and paypal fees. Please feel free to contact me if you have any questions. What I...
  8. jonathane40

    FS/FT: Boss DS-1 modded by John Spina

    I have a Boss DS-1 in very good shape that was modded by John a few years ago. It is a great pedal and John’s mod made it more usable. It has more gain and the Tone knob is usable through most of the range. Let me know if you have any questions. Asking $50 Thanks, Jon
  9. jonathane40

    FS/FT: Lumpy’s, Axis, MP FRF, Monsterpiece SS, Unlimited, Illuminated, BYOC E.S.V. Si

    FS/FT: Lumpy’s, Axis, MP FRF, Monsterpiece SS, Unlimited, Illuminated, BYOC E.S.V. Si I would rather sell, but here are a few pedals I am interested in. I will add cash accordingly. Prices include paypal fees and shiping within the continental USA. Want list Fulltone ’69 MKII Skreddy Lunar...
  10. jonathane40

    Taylor High Definition pickups similar to which Duncans?

    Hi, i have looked online about the Taylor pickups for electric guitars, specifically, the High Definition (HD), and haven’t found much information. All i know is that the neck pickup is 4K and bridge 5K. So i turn to all the experts and tone connoisseurs in this forum for help. Does anyone...
  11. jonathane40

    Difference between 5F1A and 5E3 (Tonewise)

    Hi, I have searched on google and on several forums to answer this questions and I am still confused. Most of the comparisons that i have read deal mainly with the difference in design and schematics; I am more interested in their difference tonewise. I currently have a 5F1A with a 12' speaker...
  12. jonathane40

    Replacing pots on Gibson pcb's?

    Has anyone attempted to replace the pots and caps on the actual pcb? This is how mine looks and i was wondering if it is worth a try to desolder the pots and caps and put new ones. I am afraid though that this might prove trickier. Any ideas? thanks, Jon
  13. jonathane40

    Wiring problems with a Les Paul

    Hi, I am doing a rewire of a Les Paul Classic and am having problems. I first took a picture of the original wiring and followed it. However, it did not work. Then i dismounted everything and put it all back and am still having problems. The output wire was connected and grounded to the center...
  14. jonathane40

    Will the SH-1 59' do the trick?

    I have been playing a Gibson Les Paul Vintage Mahogany (all Mahogany) and love the action, feel and the sound when it is unplugged. I have gone through several pickups and have loved none in this guitar. Custom 5 and pearly gates in the bridge and jazz in the neck. I would like the sound to be...
  15. jonathane40

    What a difference! Loving the PGb

    I just changed the bridge pickup on my VM Les Paul and i am very pleased. I used to have a custom on there and was never happy with it. I think it had too much output for my taste. On the bridge i have a jazz and i liked it. However, i want to put in a 500k pot on the neck to get a bit more...
Back
Top