Recent content by Juanhanglo

  1. J

    Full Shred Modifications

    Ive only swapped the poles, but ive done it in many different combos. 6 hex/6 filister, both ways on each pickup 12 filister on each 12 hex on each 6 hexes under the 3 low strings and filisters under the high, etc. I always end up with all filisters on both neck and bridge. Rather than tear...
  2. J

    Your favorite modded pickup?

    Put me down for the full shred set with all long filisters.
  3. J

    NECK

    Jb jr neck?
  4. J

    What is you opinion of Bill Lawrence pickups?

    You all know how it is. You google search or search here for something specific. You find plenty of links and read a ton of posts. You are reading in the here and now, with fresh thoughts and responses to some of the stuff you are reading. Then you hit the "post reply" button, and feel you...
  5. J

    Which coil scheme is more useful

    Its just a simple coil split/tap. Its a bit more work to do both inners or both outers. I find both have drawbacks. Outers has a shrill bridge sound that causes more of a scoop in the middle position Inners, you lose the "proper" neck coil position. Inners on a 24 fret exacerbates that...
  6. J

    Revstar RSE20 alternative wiring for out of phase and coil split

    The only way to pick and choose what switch position selects a pickup/s is to use a super switch. Superswitches are a bit tricky to wire, but once you know how to do it, its pretty easy. The splits can be done on thev2 current p/p pots. The phase can be done on a new third p/p pot. You then...
  7. J

    Which coil scheme is more useful

    I run some both inner, parallel. Others I run neck outer and bridge inner. There is no issues with noise on this one. Come to think of it, the dark matter 2s are quieter than lace sensors when split. Neck outer/bridge inner is the most fenderesque version, IMO. It gives you the "right" neck...
  8. J

    PA-TB3 bridge, what single-size humbucker for neck?

    By p90 types, I mean fatter single coils. More bass and mids. I see high output p90 strat type puckups and mini rail humbuckers in a similar way. Do i want a more single coil or humbucker feel to the sound? Chopper is weaker than protrack. Its eq'd differently is all. Satch track...
  9. J

    PA-TB3 bridge, what single-size humbucker for neck?

    The first thing that came to mind for me was the pro track. Satch track is a bit warmer, but also a bit more reactive like a single coil. Chopper is a bit fatter than the protrack. How do you feel about steel pole p90 types?
  10. J

    EMG strat pups

    No, thats the tie, scarf, or ascot that you have tied around your thigh fluttering.
  11. J

    EMG strat pups

    I like the 57/66tws in one of my guitars better in single coil mode. Different from passives, but really really good in their own right.
  12. J

    What strings and picks are y'all using?

    Elixir optiweb 9-42s on all my guitars. Gravity picks 3mm Gator grips 2mm Dunlop d500 2mm Primetone 2mm sometimes.
  13. J

    The Humbucker Archive: DiMarzio, EMG, BKP, Suhr & Duncan Tested – My Notes & Comparison Samples (Long Read)

    I have the satch track in my js2450. All this talk about 24 fret location and how a single rails pickup is going to sound way different. I don't hear anything but a really good neck humbucker that has a touch of a single coil vibe to it. Good job btw.
  14. J

    Why is a PAF Pro so bright?

    Sorta. 8.4k vs 8.27. Thats not much different. Its slightly lower powered. 275 vs 300mv Its supposedly brighter by dimarzio's ratings as well, but I dont hear it. To me, the biggest difference is in the attack. The paf joe is smoother. That has to be the warmer highs and mids of the VV...
  15. J

    Why is a PAF Pro so bright?

    PAF Joe > PAF PRO
Back
Top