Recent content by Kokopelli

I have a vintage Dog Ear (P90) pickup. Unfortunately, it's a BRIDGE position dog-ear, so its base-plate is too shallow, thus, the pickup does not sink deep enough in the NECK position of my guitar (making the guitar strings touching the screw pole pieces). Where can I buy a base-plate that is...

Hi I have an early 1950's P90 Bridge It produces ABSOLUTELY NO HUM, but sound kinda thin with no volume loss when switch from neck to bridge What's the problem here??? Thanks in advance!!!

There are 2 magnets in One P-90 When you're replacing the 2 magnets in ONE 90, do you want the 2 magnets to ATTRACT or REPEL each other??? Thanks

Just for my own understanding Say you have 2 single coil pickups with magnetic rods (strats/tele) 1a) If both pups are wind in the SAME direction (not reversed wound), you will have the "out of phase" sound when they are both on? What does this sound like compare to the "correct" sound? 1b)...

A humbucker-size bridge with same thickness and sweetness as A2P but with more clarity!!! Is this possible??? The A2P bridge in my les paul type guitar is pretty amazing. But I'm looking for something with the same thick and sweet singing voice of the A2P, but with more clarity. The pup must...

I currently have an Alnico II Pro in the bridge of my les paul type guitar. And I like it a lot. On the other hand, I have had no experience with the Phat Cat. Can someone please elaborate on the differences between these two pickups in the bridge position. Thanks in advance!!!

1) My second Alnico II Pro Neck Humbucker has a 7.26 reading. Is this normal? I thought it might be a bit low. 2) The sticker on the back said ROHS-IWH21 -> what does this mean? APH1N 20070716 -> does this mean it was produced on July 16, 2007? Thanks in advance for your help!!!

Now that I have an APH-1 NECK, I'm looking for a used and reasonably priced APH-1 Alnico II Pro BRIDGE Humbucker to complete the set. Please PM me if you have one you want to get rid off!!!

Hi all, Here is my situation - tele with regular tele bridge and humbucker neck 1) tele control plate 2) tele style pickup selection switch (Not Gibson toggle) 3) 250K/250K concentric (stacked) pot with .047uf cap for tele bridge pup 4) 500K/500K concentric (stacked) pot with .022uf cap for...

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=280138289958&ssPageName=STRK:MEWA:IT&ih=018 It has "1BJ" sticker in the back. Please help!

I used to have an Alnico II Pro neck humbucker. Gave it to a friend and went on a boutique and vintage binge Pearly Gates, Timbucker, Zhangbucker, Wolftone, short magnet paf, long magnet paf, double black leads pre-T-top, black & white leads pre-T-top, T-top...:eyecrazy: I still have all...

Everyone, I'm looking for a used and REASONABLY priced Alnico II Pro neck humbucker (without the cover). Thanks!!!

Maybe someone other than Evan can answer this question concerning hum cancellation and phasing issues when pairing this pup with another single-coil. I have a SD Broadcaster single-coil tele bridge. Is the Broadcaster wound clockwise or counter-clockwise? Is the Broadcaster magnet North-up or...

I recently bought a 1999 Washburn CT-290 (upscale Korean-made guitar). I went to the Washburn website and found out the the 2 P-90's were "Ducan" Unfortunately, this is a discontinued model and Washburn was not able to confirm - 1) are the stock p-90s Duncan Design or SD? 2) If SD, which...

The SD Broadcaster bridge pup has a black and a yellow wire - which one is the ground? I assume the black is ground, but just want to make sure.