Recent content by mrfunnyman

Is there anyone on here who is familiar with the conductor wiring on PRS pickups? This crap is really frustrating and I don't understand why PRS can't provide wiring diagrams with the pickups they sell. I bought a PRS \m/ metal bridge pickup to install in my 2000 PRS Singlecut Goldtop. The stock...

It's been a hot minute since I've posted on here, and I hope all is well. I know this is the SD forums, but I thought I'd seek some help here if possible. I'm not really fluent with PRS pickup wiring, so here is my scenario: I recently removed the 5 way rotary switch from my 2009 PRS custom 24...

Re: Wiring humbuckers to the 3-way switch? No, 2 humbuckers, 2 master volumes, except I want to wire the pickups to the three way switch like what you see in the picture attached. If you look closely, the pickups wires go to the switch, and then there is a main wire that goes to the volume and...

I recently built a replica Shark Destroyer guitar, I know that Eddie only wired the bridge pickup to work, but I was wanting to wire my guitar to configuration 2 humbuckers, 2 vol, and a 3 way switch, with the wires from the humbuckers wired to the 3 way switch. I've noticed on the new EVH...

Can anyone help me out please? Had somebody give me a set of used cream DiMarzio humbuckers for free. Their are no sku's on the pups so I can't identify them, the base plate is stamped "DiMarzio Pickups Made in the USA, the other issue is the wiring. - Red shows hot - White & Black are showing...

Any of you guys who use the Parson Street humbuckers in your guitars ever remove the stock A2 & A5 magnets and experiment with A3, A4, & A8 magnets? Thinking about trying A4 magnets in my set and just thought I would see if anyone has had some positive results.

Re: Pickups for a Bich Alright, Alright! Last week was a good week. I ended up scoring not only the Bich, but I also ended up scoring a NJ Classic series Mockingbird. Here is a pic of them before I yanked the pickups out of them, and removed the nut on both of them and replaced them with TUSQ...

Re: Pickups for a Bich Here ya go

Scored a 2005 B.C. Rich Bich NJ Classic series earlier today. Maple neck thru, nato body, with a 1/2 maple top. The original pups in this guitar are decent, but I thought about swapping them for a set of Dimarzio's since that was the originally came in the 70's models. Some sets I thought about...

I bought a set of pickups off of Craigslist out of a Mockingbird MK5 for $20. I want to put them in another guitar, but I don't know which wire is which on the pickup. The pickups have a red, white, green, and ground wire on them. Can anybody chime in and help me out?

Howdy folks, it's been a minute since I was last on here, hope all is well. I am thinking about taking the Seymour Duncan "Whole Lotta Humbucker's" out of my 2016 Gibson Les Paul Traditional that I have been playing for the past 2 years. Not gonna lie, the "Whole Lotta's" have exceeded my...

Hey, I was wondering if anyone knew if the pickups in the Made in Mexico Wolfgang specials have real USA Wolfgang pickups in them or are they imported Wolfgang designed pickups? I know when the Made in Japan specials came out, they had real Wolfgang pickups in them, but I've heard the quality in...

Can anyone here recommend to me a set of Tele pickups that will get me close to the sound of the pickups that came stock on Teles that Fender spit out between 68-70?

I've decided to turn one of my tele's into a Nashville style tele. I currently have in the bridge position an SD 5/2 tele pickup, and a SD Vintage 54 rhythm for tele in the neck position. Will adding a SSL-1 RW/RP middle pickup to the middle position and a 5-way selector switch to the guitar...

Looking at adding another compressor to the mix and it's come down to the Boss CS-3 and the Wampler Ego Compressor. Can I get your guy's input on both these pedals? Looking for something that will help out with come country licks.