Recent content by My Guitar Weeps

I bought a new black SD strat pu cover on the bay to change out the white cover that came with a new staggered Alnico Pro II neck and the magnet holes in the cover don't line up at all. The new black SD cover fits my fender start pu perfectly.... Are the Alnico Pro II's different magnet spacing...

I'm in the middle of a pickup swap as we speak. I've pulled out a stock tex mex tele neck pu. I'm replacing it with a APTR-1 alnico II pro which came with a black foam padding on the bottom and 2 black long wood screws (PU is brand new but not in the box. This is it...

Anyone got a spare black Duncan Strat cover lying around they don't plan on using? I'm in the good trader alert thread twice. I just wanted to ask before I resort to the ebay thing (where shipping is more than the cover itself).

MIM Nashville tele which has the stock tex mex strat in the middle (RWRP) and the stock tex mex tele neck pu. Zhang built me a killer PB for the bridge which shares the same polarity and wind as the neck (Thanks Zhang the pu kicks ass). I purchased a Seymour Duncan APTR-1 alnico II pro tele...

I've searched the forums and couldn't come up with anything & the only thing I've done is remove covers and install pickups. What I did find in the search was that apparently its pretty easy. The pu is a braided conductor nickel covered (all from the factory) CC. I read one of Jeremy's posts...

I bought a new SH-11 (nickel cover) and it's one that came braided wire and not 4 conductor. It was the first braided solder job that I've done but I checked everything twice.....the solder joint looked good but I noticed that the pickup was pretty noisey. I could actually touch the pickup...

04' Nashville tele which has the 3 pickups (Middle is a strat) 5-way switch. Now I know this guitar can be a tone monster....neck is maple....I was wondering if anyone else had changed out there pickups....I've spent so much time on my lp and learning / listening to all the hb's out there, now...

Ok, 05 Epi Standard Plus Top Lester: I stripped everything out (Wiring/pots/toggle/pu's...etc.) I replaced the toggle w/ a Gibson switchcraft and rewired New switchcraft input jack Rs guitar works historic electronics upgrade kit: (500k cts pots & Hovland .022 GuitarCaps) Neck has the...

:smack: I made a mistake and hopefully someone can give me some personal experience ar point me in a direction to correct this problem. Brand new sh-llb arrives yesterday(eBay), but no screws or springs(package was open). No big deal right? I'm replacing p/u's in an Epi LP Stand. I put a PG...

Just got a little paranoid. I have a 05 Epi LP Standard. I put a PG in the neck and bought a SH-11 (new) of ebay for the bridge. I confess, I don't know the difference in spacings. Ones pole pieces are further apart than the other, I know that. The description said nothing about spacing...