Recent content by rango

Hi guys. Does guitar need to be setup again after pickup upgrade? Thank you

Re: Multimeter shows pots resistance instead of pickup resistance when connected to j Cool Thank you so much. I have made that change. Please check if my drawing is not faulty. Few questions though that puzzle me. 1. The bridge tone CAP is going to 1st switch position BUT Neck tone CAP is NOT...

Re: Multimeter shows pots resistance instead of pickup resistance when connected to j Thank you. I've used mspaint to draw the revision. Is this correct? BTW i find odd that on the bottom pot cap is grounded to the pot where on top pot it's connected to first switch position. Is that correct?

Re: Multimeter shows pots resistance instead of pickup resistance when connected to j Awesome. Then i can use that Zanymus diagram for JP style coil splitting? So i'm looking at both diagrams from @Zanymus and GFS and push/pull pots and green wire is going on pot to where GFS white wire is...

Re: Multimeter shows pots resistance instead of pickup resistance when connected to j Thank you for explanation. I think it's same thing that Thorebak diagram says. I'm just new to all this so terminology is new to me. Maybe i'll order push/pull pots and redo it for coil splitting, when i'll...

Re: Multimeter shows pots resistance instead of pickup resistance when connected to j I'm wiring GFS pickups with Kwikplug connector that has 4 wire hence i used throbak diagram for 50s as it's also 4 wire setup. GFS wiring is as follows and my current wiring is as follows. I think i'm having...

Re: Multimeter shows pots resistance instead of pickup resistance when connected to j OKKKKK .....so i think i know what the issue may be. I have joined red (signal) and white (coil tap) together and soldered onto LEFT lug of the pot. Did that ground this? I'm not sure what i am suppose to do...

Re: Multimeter shows pots resistance instead of pickup resistance when connected to j Everything is premium, brand new. CTS 500k pots, PIO russian .22pf caps. Here is few close up pics of wiring. I did it according to 50s diagram. Multimeter reads 0.5M ohms which is 500K ohms, the value of CTS...

Hi guys. So i rewired my guitar for 50s wiring and i connected guitar cable to output jack and measured it with multi-meter to see if pickups are working. The multimeter is showing pots resistance of 500k at volume of 10 but it should show pickup resistance instead. When i switch to neck and...

Re: Pickup signal leak. Please, help... Hi guys. I am wiring my guitar right now so correct and working wiring diagram is this picture correct? That picture works without switch mod correct? Also the green wire is coil splitting wire correct? red is positive, black is ground and silver...