Recent content by RexRemus

Hoping this is the right place to ask... I'd like to try a custom guitar build, and I'm fairly comfortable with most aspects of it, but I lack the space, tools, and skill to really carve a guitar body and neck from scratch. I do feel comfortable with everything beyond that point. So I went out...

Re: Help with wiring... This is what you're looking for I believe

Re: Help with HH wiring in Ibanez S-series For completeness sake, here's an updated diagram that should be numbered as you asked, and has everything corrected to reflect the current connections - with actual connections highlighted a little better:

Re: Help with HH wiring in Ibanez S-series Here's the "sketch" of how it's wired. I was pointing out that I used a jumper between the two sides of the switch where the diagram shows two individual leads from the jumper on each respective side. EDIT: I realized I drew the line for the PCB...

Re: Help with HH wiring in Ibanez S-series Relaized that might not be super easy to see as the forum scales it down a lot so here's two slightly zoomed pics:

Re: Help with HH wiring in Ibanez S-series Jack - As I am working on these diagrams, I've noticed something - regarding the "switch flip" between the 1st and 2nd revisions, one thing I noticed was that the numbering didn't change - it's 1-5 top to bottom in both orientations. In theory, if the...

Re: Help with HH wiring in Ibanez S-series Yep, will do. I'll go over it this evening (unless something comes up - then ASAP this week) and let you know any findings and I'll post pics of how things are when I get a chance. It's not pretty in there... but I'll do what I can. For reference as to...

Re: Help with HH wiring in Ibanez S-series Hey Jack, won't be able to really dig into this again until later but as far as my notes on the (initial) diagram I believe I had the color codes correct: And while I can't say this moment I didn't somehow entirely "reverse" everything, I'm fairly...

Re: Help with HH wiring in Ibanez S-series It's actually not the height, it's the width I'm worried about - the way the switch mounts on the S-series is that there is a hole routed entirely through the body the size of the switch, this is covered by a plastic "shroud" and the switch mounts to...

Might seem silly but looking for suggestions on gauge and stranded vs solid for "jumper" wires. Most of what I've seen is solid, though I don't know the gauge - I suspect somewhere around 20-24AWG. Just looking for suggestions and/or places to buy. Obviously don't need a ton but if there's a...

Hello all, first post here. Not too far back I purchased an Ibanez PWM100 and while I love the look and feel/playability of the guitar, I have not been exactly blown away by the tone. I find the stock Mojotone Hornets to be kind of dead sounding and even muddy given the stock dropped tuning of...