Recent content by Ronnie_Snow

Thanks for the advice everyone has given. I ended up swapping the pups in both SGs only to discover that the AY sounds like it should in a different guitar... The Slash then also sounded horrendous in this same SG... Swapped them back... @freefrog how do I wire this inside out? I will try that...

I would like some recommendations for a Bridge Humbucker in an SG that can provide more bass... The guitar is just super thin sounding to the point that it needs more low end... Currently a Slash 2.0 doesn't provide enough. It's warm but there's no chug. A 59/Custom was straight up harsh and...

Last night I directly soldered the 2 wires from the output jack... Still sounds bassless... Is it possible any of the grounding wires running to the pots from the main ground sleeve would remove bass? Or what about the output jack wiring? FYI, The neck pickup has bass... And compared to the...

It is already pretty low... It measures 9.5k... I have 2 Gibson SGs. One has a Slash 2.0. The other has this Gibson humbucker... I am running both through a Friedman Smallbox and a Marshall quad. I am struggling to understand why this one sounds super thin... The Slash pup chugs considerably...

Yes Tone control behaves normally

Hi, The bridge pickup works. It's an AY Gibson pickup... I'm not sure if this guitar sounds incredibly thin or if it is wired incorrectly... There's no bass at all, it sounds good but theres not bass for an Alnico 5 pup... I have an Alnico 2 humbucker I'm comparing it to in another SG and...

Before I potentially go down the extra expensive path of the SD CS, does anyone have a Brobucker willing to ship to Australia...

I'm looking for a humbucker with medium output... I currently have a Pearly Gates/ Custom Hybrid with an A2. I also have a High Voltage. I need something in between. The PG/C Hybrid is a bit too hot and the High Voltage doesn't have enough. I am currently thinking the Slash 2.0 but there's not...

Can someone please tell me if this wiring setup has the Bridge pup connected to the tone control? If its not, can someone show me if its possible with the auto split? Thanks

I have just put a Pearly Gates in a Les Paul. I have a 59 Bridge in another Les Paul. I love the extra clarity with the Pearly Gates but I really miss the Alnico 5 thud from the 59. And I thought there would have been more treble from the Pearly Gates compared to the 59 but not as much as...

I thought I would post my recent opinions regarding a few magnet swaps. Custom with a Polished Alnico 8 - I tried this first as I have a RCA8 in a 59/Custom and love it. But here the A8 seemed to give it more midrange, close to the midrange that a JB produces, which what I was trying to avoid...

After reading these forums for years, this week I joined and completed several magnet swaps for the first time into afew humbuckers and into afew different guitars. JB > RC A8 BBP > RC UOA5 Angus Young Signature > A8 59/Custom Hybrid > RC A8 The JB was a much different beast and I much...