Recent content by spudler

I just realized/Noticed that whenever the Twin Tube Mayhem Pedal is Plugged into power no matter if the pedal is on or in bypass mode the Tubes are Energized. I suppose then that I should always unplug the pedal from the Power Supply whenever not in use for more then say 30 minutes? Is it...

I am having one heck of a time trying to implement the TTM pedal with the Digitech RP 1000. There is a Stomp Loop where this is supposedly to be ran through but I have found it hampers the great distortion and totally kills the Boost feature. I am starting to think this specific pedal is way to...

So I got a Smoking deal on a set of AHB-1 Blackouts the only problem is I have a HSH setup and I only have active HH PU's What is recommended that would be compatable and Sound correctly as far as a S PU to place in the middle position of my HSH setup? Now i realize the Blackouts are not...

I am curious if the Blackout Preamp Pot I see mentioned turns passive pu into active etc. The compatability issues is what I am worried about, I see they claim works with 4 wire PU's? I have a SH-8 Invader in Bridge a V7 in neck and S1 Middle in my Ibanez The Sh-8 is the only 4 Wire PU the V7 is...

I was looking through my collection of Pots so I could attach a Tone Pot on my 6 string with SH-8 Invader Bridge PU and I realized they look teh same and are Rated teh same 500K Ohm but they each have a different letter prior to the 500K two are a D500K Ohm, one is a A500K Ohm, a C500K ohm and a...

On my Ibanez 6 string with a SH-8 Invader I found that removing the Tone Pot solved a Volume Issue i had plus I like the sound better without it, But with the AHB-1s Blackouts being active PU's and the Pots being 25K ohm rather then 500K ohm should I be using teh tone pot or at least have it...

I was looking at the Compare Tone section on the main site and the Info on the AHB-1 B & T Look to have a Typo in the reasonant Peak section it says Neck is 750 Khz which is far beyound anything humans can hear so I assume it is supposed to be 750Hz and 530HZ for Bridge? Just checking cause...

Hey I am curious I found that on my SH-8 Invader on my 6 string I liked the tone alot better without a tone pot and seeing how I never really used the tone pot I wasn't mising anything, Would disconnecting the tone pot on the AHB-1s Blackouts have a similar effect as I found in the Invader? I...

I recently installed a 7 string set of the AHB-1 Blackouts in my Customized 2006 RG 7321 and I am getting alot of hum from my TV which is a problem as I use my tv sometimes to follow along with DVD's. Is there possibly something I did incorrect in installing them? I thought these were supposed...