Recent content by Syscokid

I have the STK-T2b waiting to get installed into my Esquire-style guitar that is already set up with 250K volume and tone pots. Has anybody here tried 500Ks with this type of pickup at the Tele bridge position? :scratchch

All nine (9) pickups for $200 plus cost of your choice of shipping. USPS Priority Shipping: Within the USA about $14. Canada is about $45...? 1: Seymour Duncan JB (SH-4), 16.5 DCR, 4-conductor and 11" of cabling. Excellent condition. 2: Seymour Duncan JB (SH-4), 16.5 DCR, 4-conductor and 8.5"...

Long time ago, I installed a set of Fender Custom Shop 69's in my '01 American Deluxe. Later I replaced the bridge with an SD Classic Stack Plus STK-S4b (DCR 8.6)... love it! Recently, the neck pup got accidently demagnetized. Just replaced it with an SD Classic Stack STK-S1n. Don't think SD...

Re: Problem with a recently purchased used JB The neck PU is an SD 59 with the 2 conductor wire/cable, which is wired correctly. On a different guitar, which is my SG, I have the bridge PU wired to a push-pull switch that puts the bridge in the out-of-phase mode. So when in the bridge only...

The guitar is a Hamer with 2 volumes, 1 tone, and 3-way switch. Just bought a used JB to replace the stock SD 59 at the bridge. I'm getting a very weak (and I mean really weak...!) output signal from the amp at the bridge-only selection. The mid position kind of sounds right. DC resistance...

I have 2 Hamer guitars originally equipped with SP90-2's in the neck, and SP90-3's in the bridge. With the first Hamer, I got curious with trying a "cleaner" set of P90's. Thus, I ended up with a set of Kinman's "Zero-Hum" PU's...Excellent PU's but a little pricy! With my recently aquired Hamer...