Recent content by taildragger

I was wondering if anybody can tell me whether or not the Duncan Custom Shop can swap out a pickup from a square legged baseplate frame to the type shown below?

I am trying to split in paralell the inner coils of 2 humbuckers with an on-on DPDT switch. when in the middle posistion of the 3-way I would l like both pickup to split in parallel when switch is activated. Here is how I wired it http://home.pacbell.net/mark70/splitp.jpg The bridge posistion...

I was wondering if it was possible to split in paralell the inner coils of 2 humbuckers with a 3-way switch? Posistion 1 Bridge, Middle posistion split in paralell inner coils(SLUG's), Posistion 3 Neck. If possible, can someone explain to me how to wire 2 4-conductor Duncan pickups in this...

I want to install a Duncan 4 conductor humbucker into my PRS Custom 24. The guitar has has the 5-way rotary switch with the circuit board. I only wish to install a duncan Bridge pickup and keep the PRS neck pickup. It is unclear to me if I have to flip the pickup 180 degrees with the pole pieces...