Recent content by teddeeh

Hello guys and gals. I have a repair job coming up. Id say im fairly competant with guitar building and soldering etc. This would be my first pickup repair. Its a tele stack that i bought very cheaply and was wondering if anyone knew where or what i shoud do with this. How to test that there...

Hello guys, im trying to decipher what my pickup code is. I know its a jb, and is gibson spaced from a yamaha rgxtt (wrong spacing in my guitar from factory. Phenominal.) So. Underneath i have a small white label with two rows IHY47 SH4 0658 Any ideas to uncovering this code? Cheers guys.

Re: Using dupont connectors many thanks for the replies guys, i have just been very busy finishing my latest guitar Will be giving it a go very soon

Hi, i have a 5 way super switch and am looking for help with a specific wiring. 1 bridge 2 bridge split 3 neck split 4 neck parallel 5 neck Any help or takers in helping me withthis??

Hi im thinking of using dupont connectors to connect my pickups. See photo for type of connector Roughly halfway up the length of cable required to connect the pickup to the switching. To keep the custom wiring but to swap pickups with ease. Would this be ok to do or would i get alot of...

Re: Blower Switch for P-rails....? thank you.. the problem i had with the blower wiring with the original SD diagram, was that when one of the coils (rail- tone pulled up) was taken out of the equasion by the push pulls, it just didnt work.. i.e when pulled up the blower when switched on was...

Can anyone help me with a diagram to wire my new guitar with blower switch.. electronics are the standard wiring diagram in support (above) 2-prails, 1vol, 1 tone, 3way, 2 push pulls. (option #2) i want the blower to be bridge normal humbucker... i tried wiring a 2dpt switch and only worked...

hi guys, i am trying to install a blower switch to my prails loaded guitar. im using '2 p-rails, 1 vol, 1 tone 3way, 2 push/pulls option 2. when i use vol push pull the blower dosent work. its a dpdt on/on switch im using. is there no way around it, or is there a way i can get the blower to...

hey guys, i am building a guitar at the moment and cant find any schematics out there for a 2 humbucker guitar, 1 push pull vol, with the push pull being pup selector. could anyone help? or if any genius can sort it out meebe design the schematic for me? if the style, if possible, of SD's...

hey guys first post so hi all,, anyways, my question is this: i am building a telecaster and want to put an invader in the bridge position with a vintage rails in the neck. its a black body with a white pinstripe round the edge and a reverse headstock. what pots would i need and what ceramic...