Recent content by Tobias

  1. T

    Matching Trembucker output with 2 single coils.

    Re: Matching Trembucker output with 2 single coils. I can accept that a split HB won't sound true single. But, I have and have had humbuckers that sound great when split. But this is my first strat style, 3 pick up guitar. I've always (40 years) played guitars with 2 humbuckers. The way it...
  2. T

    Matching Trembucker output with 2 single coils.

    I don't know the actual output of any of my pick ups but here's the DCR. Neck single coil 6.3k Mid single coil 5.7k Bridge Humbucker 12.4k (6.3k when split.) I don't particularly like the sound/tone of the G&B brand humbucker when split so I'm looking for a Trembucker to replace it. But, I know...
  3. T

    Blend Pot in Pacifica diagram?

    Re: Blend Pot in Pacifica diagram? Here's a closer up of the DPDT. The left side has my green and yellow wires I added to get the bridge side of the bridge humbucker in the neck and neck/middle positions. The right side has the white wire that grounds the neck side of the bridge humbucker (via...
  4. T

    Blend Pot in Pacifica diagram?

    Re: Blend Pot in Pacifica diagram? The green and yellow wires are the ones I added to get the humbucker on in the neck and neck/mid positions by pulling up on the DPDT. But what happens automatically, and I don't understand how, is whenever the 5 way is not in the bridge only position the...
  5. T

    How to measure DC output with Pickups installed?

    I am trying to choose a bridge pick up that is close in DC value/Output to my neck and bridge. I am measuring my pick ups DC value with the pick ups installed and the 500k volume pot knob at 10 and 250k Tone pot on 10. I don't think it's precisely accurate this way. Is there a way to guestimate...
  6. T

    Blend Pot in Pacifica diagram?

    My Pacifica has HSS, one 500k volume pot and only one 250k tone pot. The tone pot is also a push/pull coil tap for the HB. 5 way selector (bridge, bridge with middle, middle, middle with neck and neck.) But, position 2 also automajically splits the HB even without the tone pot pulled up...
  7. T

    Bridge Humbucker for Mohogany / Mohogany

    Years ago someone stuck a Jackson J-80C in the bridge position of my old Vantage VLP-500. (Matsumoku metric Les Paul). I'm looking for a good recommendation for a better replacement bridge pick up. I play mostly classic rock, hard rock, blues, and country stuff through small Fender Combo Amps...
Back
Top