Recent content by vanlandau

A PT 100 / CAA 100 watt clean channel amp with the Marshall 100 watt power amplifier paper wound heyboer OT and Power tranny and the suhr / BF style preamp because it takes pedals well..... Run a MIAB and the Marshall Iron gives it that last 10% and run everything in the front Maybe with reverb

Hey guys the dan Armstrong Wiring mod allows you to get a fender strats middle pickup out of phase OR in series with the neck or bridge pickup, is it possible to modify this wiring scheme to allow for SERIES AND OUT OF PHASE with the neck or the bridge at the same time? Thank you :) Example...

Hey i'm thinking of getting a mark v 25/35 and want to get a kind of 2203/4 ish sounding cabinet perhaps with g12-65 heritage or old t75 speakers, what modern or old marshall cab should i consider? These speakers i suspect react well with the v like they do with the 2203, but with a mark you...

Has anyone ever thought of putting a back panel on a mark v 35 combo？the main downfall of this amp is the open back lets down heavy chunky mark series tones, i mean 20kg mark series come on！！

Which would you go with and why? I have a way huge swolen pickle and while its pretty good it also has so many controls that it detracts from it a little bit

Hey can i use a 4dpt s1 switch to put a pair of humbuckers in series with each other and out of phase？And what if they are 4 conductor？and in a hsh setup？ Thanks

Silly question, I have a fuzz with a load control for input impedance, and when i turn the control down it cleans up quicker a bit like a fuzz face or classic treble booster circuit, i wondered if you used 250k volume pots instead of 500k does this help also? For humbuckers

Hey has anyone coaxed a mesa mark series tone out of a friedman be-od pedal via the tight control to replicate the tight distortion one gets from turning the bass knob most or all the way down on a mesa mark series? Thanks

Bit curious... Does anyone run the rails inner in series, they sound a bit bright on there own but particularly in parallel facing towards each other from what i have heard in clips Also if the rails are anything like the hot rails pickup then aren't they supposed to be in series to achieve...

Hey i'm building a guitar with tb-16 and sh-16 (in the neck) pickups and i am pondering on which way round to wire them Note that 1: my wiring scheme incorparates inner and outer coils tones, and sort of needs the slugs to be either close or far apart 2: i'm using a 24 3/4" conversion scale...

Has anyone ever built a diy zvex super duper and modded it for a low input impedance like a fuzz face? I ask this because when you slam the one sho into the other it gets fuzzy the more you hit it and therefore.... Possible stable FF Makey Sensey?

Hey, can i shop floor custom order a humbucker with both it's coils reversed in wind direction from what they are standard? i'm looking to put 2 59/custom hybrids into it and want the split to inner and outer coils tones to be hum cancelling and since the 2 pickups are both bridge pickups...