banner

Announcement

Collapse
No announcement yet.

review of gec kt66

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #16
    Re: review of gec kt66

    Originally posted by jeremy View Post
    even with the bias set at 53 ma on the super the plates were still getting 425v or more and on the other amps im sure the tubes were getting at least 450v so the tubes handle over 400v fine. im not sure id put 700v on them, or any tubes besides kt88 or 6550. these are a direct 6L6gc replacement except for the extra current draw
    On the Musicman Amp Forum, I found that the tubes in a Musicman only get biased to around 23 ma per tube, so would that make a difference?
    - Tom

    Originally posted by Frankly
    Some people make the wine. Some people drink the wine. And some people sniff the cork and wonder what might have been.
    The Eagle never lost so much time as when he submitted to learn of the Crow.

    Comment

    • #17
      Re: review of gec kt66

      yup, one goes up other goes down. thats really cold, this is the one with the ss front end right?

      Comment

      • #18
        Re: review of gec kt66

        - http://www.mclink.it/com/audiomatica/tubes/kt66.htm - A link to tube Data
        KT66 Plate voltage 550V. MAX.
        KT88 800V MAX
        sigpic

        - http://www.soundclick.com/bands/defa...?bandID=804435 -
        - https://soundcloud.com/mr-ds-bigband/tracks -

        Warning: May contain traces of NUTS

        Comment

        • #19
          Re: review of gec kt66

          Originally posted by jeremy View Post
          yup, one goes up other goes down. thats really cold, this is the one with the ss front end right?
          Yup, some of them had tube PI, but this one is solid till the amp stage. It is really cold, but the poster on the MM site claimed many a Musicman was ruined by someone biasing it like a Marshall.
          - Tom

          Originally posted by Frankly
          Some people make the wine. Some people drink the wine. And some people sniff the cork and wonder what might have been.
          The Eagle never lost so much time as when he submitted to learn of the Crow.

          Comment

          • #20
            Re: review of gec kt66

            Originally posted by GoldenVulture View Post
            - http://www.mclink.it/com/audiomatica/tubes/kt66.htm - A link to tube Data
            KT66 Plate voltage 550V. MAX.
            KT88 800V MAX
            I have used this particular tubes for about 9 years and can not recommend going over 525V.

            Jeremy: I am glad you like these tubes - Enjoy them to the fullest extent possible! Merry Christmas - Early!
            Support Code 211 - Stop the bad boys, you know COPS!
            When we do right nobody remembers when we do wrong nobody forgets!
            Red Devils - 1% all the way!
            Screw anyone who post negative crap on my post!
            Finding out that there really is a lot of traffic on the Highway to Hell, but no waiting line on the Stairway to Heaven.

            Comment

            • #21
              Re: review of gec kt66

              thanks again larry!

              Comment

              Previous 1 2 template Next
              Working...
              X