Re: HOW TO: Make a 59/Custom Hybrid
I got to step 3 and now I am at a stand still. the 59 is a braided wire and the CUstom is a 4 conductor. I took notes.
The 4 conductor Custom:
Slug Coil: white wire goes to the white wire of the 4 conductor wiring, black wire goes to black wire of the 4 conductor wiring.
Screw Coil: white wire goes to the red wire of the 4 conductor wiring, black wire goes to the green wire of the 4 conductor wiring.
The above wiring is when you have 2 - 4 conductor pickups.
The 2 conductor 59:
both coils have 2 black wires each, so I am confused which goies to where and how the braided cable comes into play. I know one coil goes has a wire going to ground, and the other coil has one wire going to the braided cable hot output.
I got to step 3 and now I am at a stand still. the 59 is a braided wire and the CUstom is a 4 conductor. I took notes.
The 4 conductor Custom:
Slug Coil: white wire goes to the white wire of the 4 conductor wiring, black wire goes to black wire of the 4 conductor wiring.
Screw Coil: white wire goes to the red wire of the 4 conductor wiring, black wire goes to the green wire of the 4 conductor wiring.
The above wiring is when you have 2 - 4 conductor pickups.
The 2 conductor 59:
both coils have 2 black wires each, so I am confused which goies to where and how the braided cable comes into play. I know one coil goes has a wire going to ground, and the other coil has one wire going to the braided cable hot output.
Comment