Tweet
I saw this diagram for a Shadow Killpot to be wired as a volume pot and I was wondering if it was correct. Traditionally I see input on the left lug, output in the middle, and ground on the right.
-
-
Re: Is this diagram correct?
Input on left and output in middle is dependent wiring. Input in middle and output on left is independent wiring. It really only makes a difference on a guitar with two volume pots.Originally Posted by IanBallard
Rule of thumb... the more pot you have, the better your tone. -
Re: Is this diagram correct?
Doesn't it draw out the taper to put the input on the middle and the output on the left? That's been my experience, but it's been a while since I've wired it the standard way.The things that you wanted
I bought them for youComment
-
Re: Is this diagram correct?
I haven't noticed a change in taper due to how I wire a pot (that doesn't necessarily mean that there isn't a change...I just haven't noticed it), but I have certainly noticed differences in different brands of pots, all supposedly log tapers.Originally Posted by IanBallard
Rule of thumb... the more pot you have, the better your tone.Comment
Comment