I don't know if this is the right place to post this.. i am playing guitar emulation software ( bias fx, amplitube 4) through computer and interface. However i noticed that through pair of M-Audio BX5 speakers the sound is not really good. The sound is boomy, or how can i describe it, it sounds like there is too much of bass response going on. And not only in daws, recording software.. also with listening to music on you tube, media player etc. I found out how to fix that.. I set equalizers almost everywhere with bass reduction setting, than it's ok.. Does anyone else have that kind of problem with this particular speakers? I have doubts about studio place not being so well, but i also have doubts about this speakers. In the same room i run Randall Diavlo RD1 through Orange PPC 1x12 cab, and the sound is maybe a little bit too boomy, but far superior than what i get from BX5s through daws. I need no equalizer for the amp in the room at all. I tried MXR, with bass reduction setting, but there was no changes in sound of the amp.
Announcement
Collapse
No announcement yet.
M-Audio BX5 Speakers, problems with too much bass
Collapse
X
-
Re: M-Audio BX5 Speakers, problems with too much bass
i have a set of those but havent noticed them being overly bassy though they dont lack bass for being so small. they arent terrific speakers or anything but for the price i paid and as long as ive had them, i cant complain
-
Re: M-Audio BX5 Speakers, problems with too much bass
Originally posted by jeremy View Posti have a set of those but havent noticed them being overly bassy. they arent terrific speakers or anything but for the price i paid and as long as ive had them, i cant complain
Comment
-
Re: M-Audio BX5 Speakers, problems with too much bass
The problem being present with both your BX5s and guitar amp point to a problem with placement or room acoustics. Those speakers are rear-ported, so they need to be at least a foot away from any wall. You should also avoid putting speakers in the corner of a room. Lastly are your speakers sitting directly on your desk, the floor, or some other large, solid surface? If either your BX5s or your PPC112 are sitting on such a surface, they'll be coupling which increases bass response. Moving the speakers away from the wall/corner and isolating them from the floor or desk in some manner may solve the issues you're seeing.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: M-Audio BX5 Speakers, problems with too much bass
Aha.. than it's probably the room acoustics thing. I don't know, i have them a little distanced from the walls already, they're not that close to walls.. It's seems that it's way more problem with bx5s than with orange cab. I'll try to experiment a little. But, as i said, an add of equalizers on the computer with bass reduction setting almost totaly fixed that problem. I guess i would need to shape all the final recordings with a help of a headphones than.Last edited by Lux84; 10-26-2018, 01:52 AM.
Comment
-
Re: M-Audio BX5 Speakers, problems with too much bass
Originally posted by jeremy View Posti have a set of those but havent noticed them being overly bassy though they dont lack bass for being so small. they arent terrific speakers or anything but for the price i paid and as long as ive had them, i cant complain
Comment
-
Re: M-Audio BX5 Speakers, problems with too much bass
Originally posted by Lux84 View PostAha.. than it's probably the room acoustics thing. I don't know, i have them a little distanced from the walls already, they're not that close to walls.. It's seems that it's way more problem with bx5s than with orange cab. I'll try to experiment a little. But, as i said, an add of equalizers on the computer with bass reduction setting almost totaly fixed that problem. I guess i would need to shape all the final recordings with a help of a headphones than.
I would suggest a) not using EQ, but a high pass filter, if you MUST do something. Then use a spectrum analyzer to verify that you are not missing problem areas that you cannot hear when you mix or b) using some sort of room dsp plugin that comes with a measurement microphone, like ARC2 (this is what I use). Finally, c) treat your monitoring space!!
In any event, I would suggest you read up on room modes and standing waves to best understand what’s going on.
Do not follow blind, unsubstantiated advice as to where to place the speakers in your room, every room and set of ears is different.
Edit: if you are not using the monitors for critical listening or mixing, there’s no need to do any of this!Last edited by TwilightOdyssey; 10-27-2018, 06:48 AM.Why don't you take your little Cobra Kais and get outta here?!
My collaborative PROGRESSIVE ROCK PROJECT, As Follows.
Comment
-
Re: M-Audio BX5 Speakers, problems with too much bass
Originally posted by TwilightOdyssey View Postif you are not using the monitors for critical listening or mixing, there’s no need to do any of this!
You know room acoustics far better than I do, but I figured that coupling or possibly having the speakers too close to the wall would be easy things to fix.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: M-Audio BX5 Speakers, problems with too much bass
Originally posted by dystrust View PostAbsolutely agreed.
You know room acoustics far better than I do, but I figured that coupling or possibly having the speakers too close to the wall would be easy things to fix.Why don't you take your little Cobra Kais and get outta here?!
My collaborative PROGRESSIVE ROCK PROJECT, As Follows.
Comment
-
Re: M-Audio BX5 Speakers, problems with too much bass
Originally posted by TwilightOdyssey View PostAbsolutely! Those are simple, easy-to-implement fixes that have noticeable results. Small nitpick: you want to decouple the monitors. Coupling is what is contributing to the issue.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: M-Audio BX5 Speakers, problems with too much bass
Originally posted by TwilightOdyssey View PostThe distance from the wall is only one part of the equation. The room size and shape has the biggest affect on what you are hearing. The basic maths behind it aren’t too hard and you can find the least-offensive place in your room (hint, it’s probably at the 32-33% mark of the long walls of your room, not the middle).
I would suggest a) not using EQ, but a high pass filter, if you MUST do something. Then use a spectrum analyzer to verify that you are not missing problem areas that you cannot hear when you mix or b) using some sort of room dsp plugin that comes with a measurement microphone, like ARC2 (this is what I use). Finally, c) treat your monitoring space!!
In any event, I would suggest you read up on room modes and standing waves to best understand what’s going on.
Do not follow blind, unsubstantiated advice as to where to place the speakers in your room, every room and set of ears is different.
Edit: if you are not using the monitors for critical listening or mixing, there’s no need to do any of this!Last edited by Lux84; 10-27-2018, 01:09 PM.
Comment
Comment