I have a Yamaha "lawsuit era" Les Paul that is a bit thin sounding. More PRS than Gibson, if that makes any sense. It has a maple top (not laminated, fortunately) and an agathis back, which I believe is the cause of it. Does anyone have recommendations for pickups to smoothen and fatten up the sound? I have an Antiquity in my 61 SG and a Custom 5 in my Orville Les Paul, both of which sound great, but I think this guitar will need more low-end and midrange to get to those levels.
Announcement
Collapse
No announcement yet.
Pickups for a thin sounding Les Paul?
Collapse
X
-
Pickups for a thin sounding Les Paul?
Last edited by Eric Dahlberg; 01-06-2020, 04:07 AM.Uncle E
JRR Shop
855-557-7577 (855-5-JRR-JRR)
714-760-9080
http://www.jrrshop.com
http://www.justroots.comTags: None
-
Re: Pickups for a thin sounding Les Paul?
Besides pickups you have to look for brass metal parts on your guitar. Most helpful for me were a brass stoptail piece and longer steel studs on it. It delivered more fundamental bass and made a much fuller sound. A brass bridge added a tiny bit too, but was not worth the investment.
Pickups i liked best were the WLH for a vintage sound and Distortion for more heavy styles of music. I also made a direct comparism with the Duncan Custom. The DC were clearer, the DD a more compressed and bolder.I get the feeling the A8 will blow your skirt up more so - Edgecrusher
Smooth trades with Jerryjg, ArtieToo, Theodie, Micah, trevorus, Pierre, pzaxtl, damian1122, Thames, Diocletian, Kevinabb, Fakiekid, oilpit, checo, BachToRock, majewsky, joyouswolf, Koreth, Pontiac Jack, Jeff_H
-
Re: Pickups for a thin sounding Les Paul?
I have two guitars that are LP style that I found to be a bit bright (one of them is an Ibanez lawsuit era LP actually)....I put a Duncan Custom SH-5 in the lawsuit, and an Invader SH-8b in the other, and they worked out really well for me in giving them more output without being too bright and treble-y. Not sure if those are "smooth" enough for what you're looking for though, I'm using them more in a heavier harder rock context. The SH-8b in particular really thickened up the tone of the guitar in the way that I was hoping for.
Comment
-
Re: Pickups for a thin sounding Les Paul?
thick core or pure nickel strings will help. GHS or Dunlop are the first two companies that come to mind. As well as thicker picks than you're used to will help.
brass parts can help absolutely. Guitarfetish is a great place to start, on a telecaster I recently saw a video and it was very night and day with saddle materials I'll have a video below. As always if a bridge upgrade is worth your time make sure it's something that excites you and more than likely it'll fit other guitars if it's something you sell down the road so keep the original.
to add thickness to a guitar i'd go with a higher inductance in the pickup. Sadly not many pickup makers mention inductance so the safe bet is a slightly hotter pickup. If it's too high of an output lower the height down. If it's too muddy (dark / compressed) adjust the pole pieces and you're set.
I wouldn't change the capacitor as if it's thin sounding at a more than likely 0.047uf. If you do stick with polyester the cheap green or red ones. The rule with capacitors is the smaller the value the less compression and more brightness and vice versa.
this is the video on saddles on a tele to give an idea how much of a difference it can make
Comment
-
Re: Pickups for a thin sounding Les Paul?
Originally posted by hamerfan View PostBesides pickups you have to look for brass metal parts on your guitar. Most helpful for me were a brass stoptail piece and longer steel studs on it. It delivered more fundamental bass and made a much fuller sound. A brass bridge added a tiny bit too, but was not worth the investment.
In the video posted by shadowfire90, the brass saddles sounded very bright to me, and yet seemed to have good clean, rich and solid bass and more upper mids than the others. As you say..."a much fuller sound". The graphite saddles were by far the worst sounding...muffled, wet-blanket tone. Aluminum was bright but also very thin sounding, not much body/fullness which made it sound like it was the brightest.
Brass would be the very clear choice for me, but not enough to solve the "thin" problem of the OP. "I think this guitar will need more low-end and midrange to get to those levels". It sounds like an Alt8 is going to be the solution. The Invader is probably going a step too far. The Custom or the Distortion are good choices but NOT with the ceramic magnets...UOA5 or A8 would be my choice in those pups to fatten them up.Originally Posted by IanBallard
Rule of thumb... the more pot you have, the better your tone.
Comment
-
Re: Pickups for a thin sounding Les Paul?
Pickup-wise, look at the Alnico II Pro set, or an Alnico II Pro in the neck, and a Custom Custom in the bridge. It won't sound thin anymore.Administrator of the SDUGF
Comment
-
Re: Pickups for a thin sounding Les Paul?
Rio Grande BBQ is the answerQuality riffs in about a minute...
https://www.youtube.com/channel/UC2B...Y3EewvQ/videos
Comment
-
Re: Pickups for a thin sounding Les Paul?
Believe me, the pickups will not fully solve the problem. You need more mass and an element that connects the mass to the body. Long steel studs and a brass tailpiece, Grover tuners and a brass bridge. Keep in mind that tele vid only showed the changing of tiny pieces.I get the feeling the A8 will blow your skirt up more so - Edgecrusher
Smooth trades with Jerryjg, ArtieToo, Theodie, Micah, trevorus, Pierre, pzaxtl, damian1122, Thames, Diocletian, Kevinabb, Fakiekid, oilpit, checo, BachToRock, majewsky, joyouswolf, Koreth, Pontiac Jack, Jeff_H
Comment
-
Re: Pickups for a thin sounding Les Paul?
What gauge strings do you have on it? Thicker strings are the fastest, cheapest, and most reversible mod you can do to a guitar. Provided you only go up a size or two, you won't need to do any work with the nut or truss rod.You will never understand How it feels to live your life With no meaning or control And with nowhere left to go You are amazed that they exist And they burn so bright
Whilst you can only wonder why
Comment
-
Re: Pickups for a thin sounding Les Paul?
Thank you, all!
I just now ordered a brass tailpiece and some alnico 8 magnets. I tried to order a brass bridge, as well, but it was back-ordered. Also, I have some DR Pure Blues 11's laying around and will give those a shot. I'll report back once everything is installed.Uncle E
JRR Shop
855-557-7577 (855-5-JRR-JRR)
714-760-9080
http://www.jrrshop.com
http://www.justroots.com
Comment
-
Re: Pickups for a thin sounding Les Paul?
Originally posted by RevDoom73 View PostI have two guitars that are LP style that I found to be a bit bright (one of them is an Ibanez lawsuit era LP actually)....I put a Duncan Custom SH-5 in the lawsuit, and an Invader SH-8b in the other, and they worked out really well for me in giving them more output without being too bright and treble-y. Not sure if those are "smooth" enough for what you're looking for though, I'm using them more in a heavier harder rock context. The SH-8b in particular really thickened up the tone of the guitar in the way that I was hoping for.
Comment
-
Re: Pickups for a thin sounding Les Paul?
Something that helped a friend's LP sound fatter is a good setup. If the action is too low, the strings won't ring out as full and get choked out. Same if the neck doesn't have enough relief. Check the nut slots and make sure there is no binding up there and strings are sitting as they should. Pickup height even has an affect on whether it sounds thin or not in addition to the pole piece heights. And of course, strings. I love the Ernie Ball Rock and Roll Slinkies (10-46). Pure nickel wrap with a warmer sound. Little things can make a big difference.
Comment
-
Re: Pickups for a thin sounding Les Paul?
Thanks again for your help, everyone. I took much of the advice given and was able to fatten the sound by swapping the original pickups’ magnets with alnico 8’s, swapping the tailpiece with a brass one, and raising the action. The tone is a bit dull now, in a Dimarzio Super Distortion sort of way, but that's still a lot better than before. I’ll try some Alnico 5’s next to see if that strikes a good balance.Uncle E
JRR Shop
855-557-7577 (855-5-JRR-JRR)
714-760-9080
http://www.jrrshop.com
http://www.justroots.com
Comment
-
Re: Pickups for a thin sounding Les Paul?
Originally posted by Eric Dahlberg View PostThanks again for your help, everyone. I took much of the advice given and was able to fatten the sound by swapping the original pickups’ magnets with alnico 8’s, swapping the tailpiece with a brass one, and raising the action. The tone is a bit dull now, in a Dimarzio Super Distortion sort of way, but that's still a lot better than before. I’ll try some Alnico 5’s next to see if that strikes a good balance.
Sale thread.
https://forum.seymourduncan.com/show...7-Pickup-Purge!Last edited by Ascension; 02-09-2020, 12:19 AM.Guitars
Kiesel DC 135, Carvin AE 185, DC 400, DC 127 KOA, DC 127 Quilt Purple, X220C, PRS Custom 24, Washburn USA MG 122 proto , MG 102, MG 120.
Amps PRS Archon 50 head, MT 15, Mesa Subway Rocket, DC-5, Carvin X50B Hot Rod Mod head, Zinky 25watt Blue Velvet combo.
Comment
Comment