banner

Announcement

Collapse
No announcement yet.

Master Volume for Budda TwinMaster Amp??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Master Volume for Budda TwinMaster Amp??

    Hi all~ I'm strongly considering having a master put in my Budda TwinMaster, but I wanted some feedback (literally!) from those of you who have had some success with this. I assume PPIMV means I'd be affecting the signal after the power tube section, and/or is there another MV that might better suit this unique amp? FWIW, I use mostly the high gain input.

    So, is my only hope for any attenuation post power tubes an attenuater?
    Also, I understand the different MV's, pre & post PI, work better in certain designs, like post in Marshalls & pre in Fenders. But how could I better determine what would work best in the relatively simple Budda design? I want to do this only once.
    Thanks!!

  • #2
    Re: Master Volume for Budda TwinMaster Amp??

    I have, as per the second post of this thread


    POWER SOAK RECOMMENDATIONS


    I thought you’d been in touch with Whit at Whitney Amplification to discuss?


    Sent from my iPad using Tapatalk

    Comment


    • #3
      Re: Master Volume for Budda TwinMaster Amp??

      PPMIV - Post Phase Inverter Master Volume, it goes between after the PI and affects the signal going to the power tubes. If you want a MV after the power tubes, it is an attenuator, most likely external.

      Comment

      Working...
      X