I'm selling this guitar. 750 Euro's
Brent's custom guitar inspired me to finally get this axe together. This guitar is a mishmash of parts and changing specs. Originally, the customer asked for a 25.5'' scale fretboard and I drilled the pilot holes accordingly. However, later he was adamant about getting a 24.75'' scale 24 fret neck. Fine, but I had to change the layout of the bridge a bit to cover the pilot holes. However, due to circumstances, the buyer had to opt out of the build. The way it works is that if you opt out, you loose your deposit. helas Hence this color and control layout.
But without further ado:
[img][/img
Serial MM2001003. (Model, year, month, serial of that month: third of 2020 already!).
Some specs:
* Quilt maple top on black korina (full thickness, solid)
* 17 pcs neck (Caribbean rosewood, ziricote, goncalo alves) with easy access heel
* 25.5'' scale, 24 frets, 9.5'' - 14'' conical radius ebony fretboard
* Split block MoP/Abalone inlay
* Custom Seymour Duncan pickups
* Custom wiring
* Ziricote backplates and headstock veneer cap
The wiring is interesting, to say the least:
1: bridge full in series
2: both in series
3: both in parallel
4: both in series, out of phase (powerphase)
5: neck full in series
Additionally there's a coilsplit under the neck tone push pull pot to give 5 more usable sounds.
And as always, this instrument was crafted by hand in the Netherlands.
Brent's custom guitar inspired me to finally get this axe together. This guitar is a mishmash of parts and changing specs. Originally, the customer asked for a 25.5'' scale fretboard and I drilled the pilot holes accordingly. However, later he was adamant about getting a 24.75'' scale 24 fret neck. Fine, but I had to change the layout of the bridge a bit to cover the pilot holes. However, due to circumstances, the buyer had to opt out of the build. The way it works is that if you opt out, you loose your deposit. helas Hence this color and control layout.
But without further ado:
[img][/img
Serial MM2001003. (Model, year, month, serial of that month: third of 2020 already!).
Some specs:
* Quilt maple top on black korina (full thickness, solid)
* 17 pcs neck (Caribbean rosewood, ziricote, goncalo alves) with easy access heel
* 25.5'' scale, 24 frets, 9.5'' - 14'' conical radius ebony fretboard
* Split block MoP/Abalone inlay
* Custom Seymour Duncan pickups
* Custom wiring
* Ziricote backplates and headstock veneer cap
The wiring is interesting, to say the least:
1: bridge full in series
2: both in series
3: both in parallel
4: both in series, out of phase (powerphase)
5: neck full in series
Additionally there's a coilsplit under the neck tone push pull pot to give 5 more usable sounds.
And as always, this instrument was crafted by hand in the Netherlands.
Comment