banner

Announcement

Collapse
No announcement yet.

Tele 2 humbucker, 2 push pull pots series parallel wiring diagram

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tele 2 humbucker, 2 push pull pots series parallel wiring diagram

    I have a Duncan Little 59 in the Bridge and a 59 in the neck with 2 CTS push pull pots for series parallel. I used a guitar electronics wiring diagram but when done all sorts of issues inc grounding, grounding cutting out everything, pickups would work if grounding with fingers but still noise. . I took everything apart to checked the neck pickup wiring and everything worked perfect then double checked eventing and rewired again same problem kind of like reverse power & ground? Don't know if the wiring diagram was correct and Duncan does not have one on their website for 2 hum 1 vol 1 tone 2 push pull series parallel. Any one got another diagram that I can use thanks

  • #2
    Re: Tele 2 humbucker, 2 push pull pots series parallel wiring PROBLEM!!!

    [QUOTE=Funkyard;4396951]I have a Duncan Little 59 in the Bridge and a 59 in the neck with 2 CTS push pull pots for series parallel. I used a guitar electronics wiring diagram WHEN DONE THE NECK PICKUP WORKS BUT NO TONE CONTROL, VERY LITTLE POWER FROM THE BRIDGE PICKUP AND THE TONE CONTROL WORKS??

    Comment


    • #3
      Re: Tele 2 humbucker, 2 push pull pots series parallel wiring diagram

      I have fixed the problem forgot Switchcraft toggle post are reversed!

      Comment


      • #4
        Re: Tele 2 humbucker, 2 push pull pots series parallel wiring diagram

        Well, that will do it. How does it sound?
        Administrator of the SDUGF

        Comment

        Working...
        X