I installed a set of SSL-5's awhile ago and I'm happy with the bridge pickup. But, the neck and middle has got to go. Before I installed the SSL-5's I had a set of Eric Johnson's which were okay but the bridge was too light for me. I'm going to install the neck and middle pickups from the Johnson set and give it a shot. Is there anything I should take into consideration? Thanks.
Announcement
Collapse
No announcement yet.
Trying something different.
Collapse
X
-
Re: Trying something different.
No idea as we have no clue what you want in tone. Where do you want to go from the SSL5's fatter, smoother, glassier, cleaner what??Guitars
Kiesel DC 135, Carvin AE 185, DC 400, DC 127 KOA, DC 127 Quilt Purple, X220C, PRS Custom 24, Washburn USA MG 122 proto , MG 102, MG 120.
Amps PRS Archon 50 head, MT 15, Mesa Subway Rocket, DC-5, Carvin X50B Hot Rod Mod head, Zinky 25watt Blue Velvet combo.
-
Re: Trying something different.
Another good pick for the neck and middle is a set of SSL-2s. You can order the middle pickup rw/rp so it is hum-cancelling when used with another pickup.Administrator of the SDUGF
Comment
-
Re: Trying something different.
Which wires do I need to flip? And do I still need to flip them if the middle pickup is RW/RP? Thanks.Last edited by Explorer84; 02-27-2020, 03:24 PM.
Comment
-
Re: Trying something different.
youd either the flip the hot and ground on both the neck and middle pup or on the bridge pup. you want the middle pup to stick to the bridge if you put them top to top and the neck pup to repel from the bridge top to top
Comment
Comment