Re: I seriously screwed up. Need help.
The downside to welding the hole is that the finish needs to be removed from the weld area. You would have to sand off a small area down to bare metal, fill with weld, sand smooth then drill and tap a new hole.
It’s the best, most permanent fix but it won’t look like a factory fresh Floyd anymore.
The downside to welding the hole is that the finish needs to be removed from the weld area. You would have to sand off a small area down to bare metal, fill with weld, sand smooth then drill and tap a new hole.
It’s the best, most permanent fix but it won’t look like a factory fresh Floyd anymore.
Comment