Hi everyone,
I’m building my first kit guitar and want to try this setup: 2 humbuckers with a switch for master partial phase (4pdt) and a switch to put both pups in series with each other. The partial phase part I got from Entwistle for a single pup so I just doubled it on a 4pdt. The caps on that switch are .002 uF. The master series parallel I came up with but it’s simple, probably done before. I know the pup selector will be useless in series mode (won’t work in 1 of 3 positions) but both pups in is usually middle position anyway.
Sorry it’s messy, it’s my first time doing any of this.
Oh and IDK which pup needs to be bridge or neck
I’m building my first kit guitar and want to try this setup: 2 humbuckers with a switch for master partial phase (4pdt) and a switch to put both pups in series with each other. The partial phase part I got from Entwistle for a single pup so I just doubled it on a 4pdt. The caps on that switch are .002 uF. The master series parallel I came up with but it’s simple, probably done before. I know the pup selector will be useless in series mode (won’t work in 1 of 3 positions) but both pups in is usually middle position anyway.
Sorry it’s messy, it’s my first time doing any of this.
Oh and IDK which pup needs to be bridge or neck
Comment