Hey guys.
I just got a BKP Warpig and tested it with my mutimeter and something odd is going on.
When I test the Hot (Red) and Ground (Black and Bare for BKP), I get no reading at all on the multimeter. When I test the Hot (Red) and Split Wire (Green and White), I get about 10K which should be right because the pick up is about 20K.
I tested the multmeter (and my technique haha) on several other pick ups, Hot/Ground, and get readings fine.
What could possibly cause this pup to have no reading when testing Hot and Ground?
Jeff
I just got a BKP Warpig and tested it with my mutimeter and something odd is going on.
When I test the Hot (Red) and Ground (Black and Bare for BKP), I get no reading at all on the multimeter. When I test the Hot (Red) and Split Wire (Green and White), I get about 10K which should be right because the pick up is about 20K.
I tested the multmeter (and my technique haha) on several other pick ups, Hot/Ground, and get readings fine.
What could possibly cause this pup to have no reading when testing Hot and Ground?
Jeff
Comment