banner

Announcement

Collapse
No announcement yet.

Prs custom 24 se pickup improvement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Re: Prs custom 24 se pickup improvement

    In my PRS Custom 24 SE 30th Anniversary I went with a 59 in the neck and a Screamin Demon in the bridge. They're both covered pickups, which, to me, helped with taming some of the brightness of the guitar.

    Comment


    • #32
      Re: Prs custom 24 se pickup improvement

      Originally posted by donaldr View Post
      Order an Obsidianwire harness, it has a push-connect for plugging pickups. I have one in my Fender Strat and very very happy with the sound, top notch components and craftsmanship.
      Unfortunately no prs version of ObsidianWire is avaliable. I looked at the SD liberator a couple of months ago but I have never purchased one

      Comment


      • #33
        Re: Prs custom 24 se pickup improvement

        Take a look at Mad Hatter - https://madhatterguitarproducts.com/...inator-systems

        It might take a minute to find a kit that fits what you need, but I used this on my PRS SE Singlecut with no problems. I found it easier than the Liberator, which still requires soldering on the initial install.

        Comment

        Working...
        X