banner

Announcement

Collapse
No announcement yet.

HEX Pole Pieces for Seymour Duncan and Others!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HEX Pole Pieces for Seymour Duncan and Others!

    Replace your worn out hex pole pieces or upgrade your standard fillister style screws for tighter response and enhanced attack!

    These fit standard Seymour Duncan bobbins perfectly...no need to enlarge the holes or mess with the threads!
    • Genuine YFS brand, same as current Seymour Duncan OEM!
    • 5/8" length is ideal for optimum performance
    • #5-40 thread fits Seymour Duncan and several others (Gibson, DiMarzio, etc)**
    • Plain carbon steel for most efficient transfer of magnetic energy
    • Standard black oxide finish
    • Adjusts with common 3/32" hex wrench

    **Note: These will NOT fit SD Invader models or the older DiMarzio designs that use larger, 10-32 headless set-screws (i.e. Super Distortion, Super II/III, original Evolution, etc)


    PRICE: $5 per 6 pieces + $3.00 flat rate shipping, regardless of how many you buy!

    U.S. only at this time. Paypal preferred

    Last edited by Masta' C; 11-06-2019, 11:34 PM.

  • #2
    Re: HEX Pole Pieces for Seymour Duncan and Others!

    These still avail? How would they alter the tone over normal screws?
    Believe me when I say that some of the most amazing music in history was made on equipment that's not as good as what you own right now.

    Jol Dantzig

    Comment


    • #3
      Re: HEX Pole Pieces for Seymour Duncan and Others!

      Yes, still available!

      These will tighten and slightly brighten up the sound over traditional fillister screws

      Comment


      • #4
        Re: HEX Pole Pieces for Seymour Duncan and Others!

        They screw right in with no mods? Just checking.. Thanks
        Believe me when I say that some of the most amazing music in history was made on equipment that's not as good as what you own right now.

        Jol Dantzig

        Comment


        • #5
          Re: HEX Pole Pieces for Seymour Duncan and Others!

          Really? It's not like these things wear out.... They're not moving parts, ya know.
          aka Chris Pile, formerly of Six String Fever

          Comment


          • #6
            Re: HEX Pole Pieces for Seymour Duncan and Others!

            Originally posted by BloodRose View Post
            They screw right in with no mods? Just checking.. Thanks
            Yes, they are the exact same thread as the stock Duncan fillister and hex poles, so they screw right in. The only Duncan these won't fit is the Invader, which uses a much larger thread size.

            Comment


            • #7
              Re: HEX Pole Pieces for Seymour Duncan and Others!

              Originally posted by ICTGoober View Post
              Really? It's not like these things wear out.... They're not moving parts, ya know.
              I made these available primarily for those who like to mod or tweak their pickups, but they are also a nice aesthetic upgrade if you have old, rusted hex poles in your Full Shred, Demon, etc

              Comment


              • #8
                Re: HEX Pole Pieces for Seymour Duncan and Others!

                Bump!

                Comment


                • #9
                  Re: HEX Pole Pieces for Seymour Duncan and Others!

                  Would these fit in a Dimarzio Tone Zone?
                  Join me in the fight against muscular atrophy!

                  Originally posted by Douglas Adams
                  This planet has - or rather had - a problem, which was this: most of the people living on it were unhappy for pretty much of the time. Many solutions were suggested for this problem, but most of these were largely concerned with the movements of small green pieces of paper, which is odd because on the whole it wasn't the small green pieces of paper that were unhappy.

                  Comment


                  • #10
                    Re: HEX Pole Pieces for Seymour Duncan and Others!

                    Hey Clint, do you have 18 of them?

                    Comment


                    • #11
                      Re: HEX Pole Pieces for Seymour Duncan and Others!

                      Originally posted by GuitarStv View Post
                      Would these fit in a Dimarzio Tone Zone?
                      Yes, these will fit the DiMarzio Tone Zone


                      Originally posted by BlueSnMettle View Post
                      Hey Clint, do you have 18 of them?
                      YES! I have as many as you need

                      Comment

                      Working...
                      X