Announcement
Collapse
No announcement yet.
My favorite Charvel
Collapse
X
-
Re: My favorite Charvel
Purdy guitar! I dig it.
Sent from my iPhone using TapatalkISO - Fender Highway One Stratocaster - black
2004 Chevy Silveraro - 6.6 Liter Duramax Turbo Diesel
Pickup Booster - Lava Box - Tweak Fuzz - Vapor Trail
Comment
-
Re: My favorite Charvel
Originally posted by Kamanda~SD View PostBeauty model 2! Did you add the tone knob and the Floyd nut? (I really want to change the Kahler string locks on mine to proper Floyd nuts).
However, this is a Model series not a Fusion series.
I got this from the old Daddys Junky Music on the East Coast. The Floyd & nut were on it when i got it. I think i paid $275 plus shipping. The tip of the headstock was broke off and i fixed it. It came with an Original first edition DiMarzio Super Distortion. I put the EMG in it originally tucking the tone pot in the control cavity in back but then ended up drilling a hole. I put i Big Brass Block on the Original Floyd.
Basswood body, Indian Rosewood FB, Maple neck. I had to trim the Trem cavity with a jigsaw for the Brass Block that i was a little nervous about but i nailed it and it came out great. The body is heavy for Basswood.
Comment
-
Re: My favorite Charvel
These are great guitars; I have two, plus parts for a third that I can't decide whether to finish or sell.
The first is an '86 Model 4 body with the neck from an '88 Model 2. In this pic it has a Cool Rails and Custom 5, while it currently has a Custom in the bridge and a Kahler heavy bar. Next time I change strings I'm going to put the Custom 5 back and swap the magnet for an A2. I'm also tempted to swap necks between these two as the Model 2 neck has Sperzel locking tuners and I feel like I need a Floyd nut with the Kahler.
This is an '87 Model 1A that's completely original except for the electronics. It's set up with SSL-2s and a tapped SSL-6 in the bridge; wired master volume and master tone with a Fralin blend pot. I admit to being a bit torn as to whether I should put a Floyd nut on this neck or on my Model 2 neck.
I also have the original neck from the Model 4 and the rather heavily-modified body from the Model 2. I opened the trem route to fit an Original Floyd, routed it H-S-S with a 5-way, and stripped the finish. This would need finishing, hardware, and electronics, so not a trivial project. Maybe Swampy could swirl it for me? IF I build this one out, I'll open the neck pickup route for a humbucker, and I'm undecided on Original vs. Gotoh Floyd. For electronics I'm thinking EMGs; 89R / SA / 89 with a four-pole switch so I can switch both 89s to 'SA' mode at the same time. Honestly I need another guitar like a hole in the head, so a bit conflicted to say the least.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: My favorite Charvel
Ah Dystrust - I want a maple board model series so bad! And since we're sharing (sorry these pics are all fairly old), in order from which I purchased:
Charvel 375 Deluxe with JB in bridge:
87 or 88 Model 4, now has J90C in bridge and is all strung up. 18-22 scalloped:
87 or 88 Model 3 with DDJ in Bridge
Bonus pic! My Model 3 and my bassists model 3B...get called out by guitarists at every show we play these together:
TOUQUE ROCK...EH???? I AM CANADIAN
Comment
-
Re: My favorite Charvel
I remember when Charvel was this mysterious custom shop. Then they started appearing in lower end forms, costing just a few hundred dollars. Somewhere I have an old Charvel brochure when they were doing custom work...before the overseas and 'Charvette' eras.Administrator of the SDUGF
Comment
-
Re: My favorite Charvel
Lot of good info-and eye candy- here:
Probably my favorite from that guy's collection:
Last edited by Lake Placid Blues; 03-22-2018, 08:44 AM.
Comment
-
Re: My favorite Charvel
Originally posted by Mincer View PostI remember when Charvel was this mysterious custom shop. Then they started appearing in lower end forms, costing just a few hundred dollars. Somewhere I have an old Charvel brochure when they were doing custom work...before the overseas and 'Charvette' eras.
It's even better that Charvel went from repair shop > hot rodding guitar shop > 'building' guitars using boogie, schecter etc. > then producing bodies for dimarzio etc > and we all know the rest. It's a very interesting history with only a small part of it known to most which creates the allure.Last edited by Kamanda~SD; 03-22-2018, 09:05 AM.TOUQUE ROCK...EH???? I AM CANADIAN
Comment
-
Re: My favorite Charvel
Originally posted by Kamanda~SD View PostYeah, now the MIJ's are known for great bang for your buck imports. Kinda funny in a way. Now the ones you speak of are refereed to as 'pre-prods' and carry a hefty price tag.
AFAIK pre-pros are the guitars made prior to the introduction of serial numbers in '82 or maybe early '83. Generally speaking they tend to command lower prices than early serialized guitars because they're extremely difficult to authenticate without work orders or serial numbers.
Speaking of original USA Charvels and kicking oneself, in 2000 or 2001 I had an opportunity to buy a excellent to near-mint '85 2-hum San Dimas pointy head in pearl white with a Kahler for $400. These days that same guitar would be worth $1500-2000.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: My favorite Charvel
Originally posted by Kamanda~SD View PostAh Dystrust - I want a maple board model series so bad! And since we're sharing (sorry these pics are all fairly old), in order from which I purchased:
87 or 88 Model 4, now has J90C in bridge and is all strung up. 18-22 scalloped:
87 or 88 Model 3 with DDJ in Bridge
Also, how do you like the DD in your model 3? I have a non-logo DDL in one of my parts bins that I'm thinking about taking for a spin.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: My favorite Charvel
I really like the DD in that guitar. ****in' screams. Mind you sometimes it's a little too stiff for some parts (if that makes sense). But that's also partially because of the rest of my rig (JCM800), the fact the trem isn't on the body etc. I won't be changing it anytime soon. I was going to replace the pickup in my model 4 with a Duncan but lately I've been really diggin the J90C so it's going to stay there awhile.TOUQUE ROCK...EH???? I AM CANADIAN
Comment
-
Re: My favorite Charvel
Originally posted by dystrust View PostAFAIK pre-pros are the guitars made prior to the introduction of serial numbers in '82 or maybe early '83. Generally speaking they tend to command lower prices than early serialized guitars because they're extremely difficult to authenticate without work orders or serial numbers.
Jackson started production in late '82 and displayed a few guitars at the '83 Winter NAMM show. Charvel started using 4-digit serial numbers in late '81 after a very small run of 5-digit serials. Charvels made from '78 until serials started in '81 are called pre-pros and typically have blank neck plates. Many of these guitars have the bodies and neck heels dated, but without a serial or work order it's nearly impossible to determine a real pre-pro from a partscaster or fake.Originally posted by crusty philtrumAnd that's probably because most people with electric guitars seem more interested in their own performance rather than the effect on the listener ... in fact i don't think many people who own electric guitars even give a poop about the effect on a listener. Which is why many people play electric guitars but very very few of them are actually musicians.
Comment
-
Re: My favorite Charvel
Originally posted by dystrust View PostI could've swore that I fixed this yesterday...
Jackson started production in late '82 and displayed a few guitars at the '83 Winter NAMM show. Charvel started using 4-digit serial numbers in late '81 after a very small run of 5-digit serials. Charvels made from '78 until serials started in '81 are called pre-pros and typically have blank neck plates. Many of these guitars have the bodies and neck heels dated, but without a serial or work order it's nearly impossible to determine a real pre-pro from a partscaster or fake.
Alan Holdsworth hated brass blocks, though. His personal Charvels had Dimarzio made vintage trems with I think Gibson string spacing but the steel blocks were replaced with special aluminum blocks.
Comment
Comment