lastwinj New member Jul 25, 2007 #1 Built my first 18w finally. more of a personal build than a company build, Now it can be yours. Good luck!!! GermWatt also, don't forget about the kt77 50w I have up. thanx for looking!! germ
Built my first 18w finally. more of a personal build than a company build, Now it can be yours. Good luck!!! GermWatt also, don't forget about the kt77 50w I have up. thanx for looking!! germ
jeremy LoveMachineologist Staff member Jul 25, 2007 #2 Re: 18w GermWatt whats up with the extra preamp socket? where does the rectifier tube go, didnt see a socket for it
Re: 18w GermWatt whats up with the extra preamp socket? where does the rectifier tube go, didnt see a socket for it
lastwinj New member Jul 26, 2007 #3 Re: 18w GermWatt jeremy said: whats up with the extra preamp socket? where does the rectifier tube go, didnt see a socket for it Click to expand... the extra 9pin socket is for the rectifier. a good clue is it by the power transformer and AC in. currently, the amp does not require a tube rectifier, but one could modify the amp to use one. 3 wires need to be changed is all. germ
Re: 18w GermWatt jeremy said: whats up with the extra preamp socket? where does the rectifier tube go, didnt see a socket for it Click to expand... the extra 9pin socket is for the rectifier. a good clue is it by the power transformer and AC in. currently, the amp does not require a tube rectifier, but one could modify the amp to use one. 3 wires need to be changed is all. germ
jeremy LoveMachineologist Staff member Jul 26, 2007 #4 Re: 18w GermWatt so its designed to run a 6ca4?
lastwinj New member Jul 26, 2007 #5 Re: 18w GermWatt jeremy said: so its designed to run a 6ca4? Click to expand... yes, it can use a 6ca4/ez81. but you will need to unsolder and solder a few wires. the 6ca4 i have is bad, so, it has low noise diodes installed. jeremy
Re: 18w GermWatt jeremy said: so its designed to run a 6ca4? Click to expand... yes, it can use a 6ca4/ez81. but you will need to unsolder and solder a few wires. the 6ca4 i have is bad, so, it has low noise diodes installed. jeremy