2018 Les Paul Standard HP pickup replacement
- Thread starter corkyjon
- Start date
allstarrme
New member
Re: 2018 Les Paul Standard HP pickup replacement
If you take the bracket off the hp pickup and fit them to a new set I’m sure it can be done, but I doubt anyone is going to offer them pre-made to just drop in. Maybe someone will make separate brackets out there, I doubt there’s much market for anything beyond that.
Of course the custom shop will make you whatever you want, for a price.
If you take the bracket off the hp pickup and fit them to a new set I’m sure it can be done, but I doubt anyone is going to offer them pre-made to just drop in. Maybe someone will make separate brackets out there, I doubt there’s much market for anything beyond that.
Of course the custom shop will make you whatever you want, for a price.
Re: 2018 Les Paul Standard HP pickup replacement
https://stratosphereparts.com/2018-...ndard-hp-body-neck-project-aaa-hot-pink-fade/
Since I thought that Stratosphere parts out whole guitars, I'm surprised that they don't sell any hardware for the HP. It's too much hassle to live on the cutting (bleeding) edge this time!
https://stratosphereparts.com/2018-...ndard-hp-body-neck-project-aaa-hot-pink-fade/
Since I thought that Stratosphere parts out whole guitars, I'm surprised that they don't sell any hardware for the HP. It's too much hassle to live on the cutting (bleeding) edge this time!
ItsaBass
New member
Re: 2018 Les Paul Standard HP pickup replacement
I don't know. But I would imagine it's just screws and springs, with the screws going through those plastic inserts in the back of the guitar instead of holes in pickup rings. No friction required; the springs would keep the pickup ears pulling the screws tight against the plastic inserts in the back. Again, just theorizing based on photos, not having the guitar in hand.
I don't know. But I would imagine it's just screws and springs, with the screws going through those plastic inserts in the back of the guitar instead of holes in pickup rings. No friction required; the springs would keep the pickup ears pulling the screws tight against the plastic inserts in the back. Again, just theorizing based on photos, not having the guitar in hand.
Similar threads
