3-Way Schematic Time, Brain Freeze..

Z

zozoe

New member
Greetings again.... Just when I thought I conquered everything, Brain Fart sets in.. Been a long day... I desire B•BM•BN,,, 3-way, all single coils.... Mille grazie
Scheme?.... Mincer!! Thnx, Kenny ॐ
 
I'd use a Gretsch tone switch, wire the bridge straight to the jack, since it's on all the time, then have the 'tone' switch be up-neck, down-middle and center bridge only (middle/neck off)
 
Blade,, thnx...... my go to is a 4-way B•BM•BN•N, but I'm wandering aloud,,, wondering allowed.....
oh,, 1-v,, 1-t
 
Last edited:
Assuming the BN and BM positions are parallel and the switch is a Fender style tele blade it's easy peasy... only need one side of the 3-way. Do you need a diagram or does the following make sense?

On the switch:
Common Lug = Bridge Hot + output to volume pot
Lug 1 = Open
Lug 2 = Middle Hot
Lug 3 = Neck Hot
 
And this is one of those situations where you'd want N & M to both be RWRP for those positions to be noise-cancelling.
 
You must log in or register to reply here.
Back
Top