Gabrielinconfident
New member
Hi. I have a guitar with a 5-way switch and HSH configuration. I want to change it into a 3-way switch for the humbuckers and use a push/pull to turn the middle pickup on and off. The problem is: the switch I bought has all 8 terminals straight, not staggered like the tele ones. I'm kinda green on pickup wiring (as you probably noticed by now) and I'm not sure how I'm supposed to do it. I've just recently done a fairly complex wiring, with coil splitting and phase inverting, and it worked. But it was a toggle switch, and I've never done a blade before. Please, can someone help me out? Just saying the order of each terminal or doing a quick Paint drawing of the switch would be just fine, no need for the whole schematics.
