A little wiring help?

derekoflifer

New member
Hey everyone, I just put in a '59 in the bridge and an Alnico II pro single coil in the neck, I have a single 5-way switch, one volume and one tone. I have a diagram and was hoping someone could connect the dots for the best combinations. Each switch picture shows the switch continuity in each position (i.e. pin 1 is the same on every switch). I know I put this in the other section of the boards also, sorry if that's a no no. Any help would be greatly appreciated.

Pickup%20wiring-Model.jpg

http://users.rcn.com/jeephome604/Misc/Pickup wiring-Model.jpg

Thanks. Derek
 
Last edited:
Back
Top