TinPan
New member
Before I start, this is still the same Gibson SG I have been working with over the past few months, I have been installing pup's for quite some time (40+ years) However things have changed so much over the years so Im going to ask you guy's to throw some suggestions my way. I have a pair of (restored) p-rails on the way from the custom shop (new 5 wire cable's being installed) but before I go ahead and install them (Im installing a split coil push pull system, w/o extra toggle switches) I recently found out that p-rails are not the best pups for this set up. So give me some advice for the best pups to use. The guitar will be used mostly for blues (bell tones required) and classic rock covers and recording originals, sometimes will need clean single coil sound and sometime heavy crunch.
Suggestions please!
Don
Suggestions please!
Don