chickencoop
New member
Allparts & Carvin necks, Gibson 490R/T PCB set, mahogany Tele P90 body, 3x3 Klusons
Reluctantly clearing out some sweet parts to help pay for a 500 series lunchbox. No trades or out of the US Shipping.
An Allparts maple neck with bone nut and Sperzel locking tuners. *I am pretty certain, but not 100% sure that this is an SMO. *The frets are pretty big and it does seem fairly flat to me. This is a great neck that I have had on a couple of guitars, but I have so many partscasters, it got relatively light use. *Because of the ambiguity, I'll offer this at the bargain price of $130 shipped/PP'ed to the lower 48.
A Carvin neck that I got from the original owner who bought a paddle neck from the Carvin factory and made their own shape. *They also painted the front of the headstock orange. *The neck is reamed and drilled for Sperzels. *Needs a nut and I will include a new Carvin nut (easy to install/glue in), but the frets and rest of the neck are on good shape. $OLD
Also for sale, a complete circuit board/quick connect PCB, no solder Gibson wiring harness and pickup set. These all came out of my 2014 Studio. Pickups are a 490T bridge and 490R neck with chrome covers. Bridge pickup has a little ding in the cover that is sort of noticeable in one of these pics. The neck pickup has some light scuffing on the cover. These actually sound great, but I got a great deal on a set of Wolfetone Legends that replaced them. Neck has a little over 13" lead and bridge has a little over 7" lead. Comes with the Switchcraft switch and jack- also both with quick connect ends so you could upgrade a LP or SG type guitar w/o soldering. The harness has push-pull volume pots to split the pickups and has what looks to be big honkin Orange Drop tone caps. Your bridge ground wire just connects into a spring loaded port. $OLD If I split them I will cut an inch off the leads from the quick connector so whoever buys the harness and electronics can connect them to their pickups.
For sale, a one piece mahogany Tele body I got from eBay seller hybridgeetars. Relatively lightweight- mid 4 lbs. if I recall correctly (and I won't buy heavier). Finished in boiled linseed oil and wipe on poly-- not pro, but pretty good. Has Strat cuts (forearm and belly). Comes with artfully, if not textbook installed Glendale ferrules and Dunlop locking strap buttons. Routed for P90's and I found that they were a little bit off center. It sounded good with Thorn P90's in there, but it was noticeable cosmetically. Comes with a matching wood back plate. As a result of the alignment issue, I will let this go for $70 shipped/PP'ed to the Lower 48. I paid about $150.
Kluson Deluxe 3x3 Tuners from the same Studio. In great shape. $30 shipped/PP'ed to the lower 48.
Reluctantly clearing out some sweet parts to help pay for a 500 series lunchbox. No trades or out of the US Shipping.
An Allparts maple neck with bone nut and Sperzel locking tuners. *I am pretty certain, but not 100% sure that this is an SMO. *The frets are pretty big and it does seem fairly flat to me. This is a great neck that I have had on a couple of guitars, but I have so many partscasters, it got relatively light use. *Because of the ambiguity, I'll offer this at the bargain price of $130 shipped/PP'ed to the lower 48.
A Carvin neck that I got from the original owner who bought a paddle neck from the Carvin factory and made their own shape. *They also painted the front of the headstock orange. *The neck is reamed and drilled for Sperzels. *Needs a nut and I will include a new Carvin nut (easy to install/glue in), but the frets and rest of the neck are on good shape. $OLD
Also for sale, a complete circuit board/quick connect PCB, no solder Gibson wiring harness and pickup set. These all came out of my 2014 Studio. Pickups are a 490T bridge and 490R neck with chrome covers. Bridge pickup has a little ding in the cover that is sort of noticeable in one of these pics. The neck pickup has some light scuffing on the cover. These actually sound great, but I got a great deal on a set of Wolfetone Legends that replaced them. Neck has a little over 13" lead and bridge has a little over 7" lead. Comes with the Switchcraft switch and jack- also both with quick connect ends so you could upgrade a LP or SG type guitar w/o soldering. The harness has push-pull volume pots to split the pickups and has what looks to be big honkin Orange Drop tone caps. Your bridge ground wire just connects into a spring loaded port. $OLD If I split them I will cut an inch off the leads from the quick connector so whoever buys the harness and electronics can connect them to their pickups.
For sale, a one piece mahogany Tele body I got from eBay seller hybridgeetars. Relatively lightweight- mid 4 lbs. if I recall correctly (and I won't buy heavier). Finished in boiled linseed oil and wipe on poly-- not pro, but pretty good. Has Strat cuts (forearm and belly). Comes with artfully, if not textbook installed Glendale ferrules and Dunlop locking strap buttons. Routed for P90's and I found that they were a little bit off center. It sounded good with Thorn P90's in there, but it was noticeable cosmetically. Comes with a matching wood back plate. As a result of the alignment issue, I will let this go for $70 shipped/PP'ed to the Lower 48. I paid about $150.
Kluson Deluxe 3x3 Tuners from the same Studio. In great shape. $30 shipped/PP'ed to the lower 48.
Last edited:
