Andromeda porblem.

Martin123

New member
Hey! Today I've recieved Andromeda Dynamic Delay, and it sounds WONDERFUL, but there's a problem with dynamic expression function, it doesn't seem to work. When it's on "hard mode" and when I strum gently, there's no delay at all, and when when hard, you barerly can hear it, soft setting doesn't work at all. Should I send it back for a warsranty?
 
Re: Andromeda porblem.

Welcome to the forum!

Is the Threshold LED turning on at all, in any of the modes? My first thought is that you have the Threshold set higher than you can strum, so turn that down.
 
Re: Andromeda porblem.

My first thought was the threshold was set too high as well. Try turning it all the way down.

Is there any way you can make a quick video of the issue? Be nice to see what the pedal is doing
 
Re: Andromeda porblem.

Today I noticed when I get fuzz on, the dynamic expression works like it should, but shouldn't it work with clean tone as well?
 
Re: Andromeda porblem.

Sounds like it's still a threshold issue. If it's set too high, it won't 'trigger' properly. By adding the fuzz you are increasing the output and hitting it harder. So two questions:

1. what guitar are you putting it through?
2. Did you try with the threshold knob all the way to the left?
 
Re: Andromeda porblem.

Sounds like it's still a threshold issue. If it's set too high, it won't 'trigger' properly. By adding the fuzz you are increasing the output and hitting it harder. So two questions:

1. what guitar are you putting it through?
2. Did you try with the threshold knob all the way to the left?

1.Fender strat classic player 60's.
2.Yup, I've tried that already. Same results :(
 
Re: Andromeda porblem.

1.Fender strat classic player 60's.
2.Yup, I've tried that already. Same results :(

Were you able to get some help from our customer service reps? If not let me know, I'll send you a PM with my email.
 
Back
Top