Any Yamaha SG/SBG experts out there?

[revolution]

Hello. I need a bridge for a 70s SG2000. I got the brass block in there, but I need the Tune-O-Matic. I hear the Gibson ones don't retrofit on the SG/SBGs. Any suggestions? Thanks.

 

[d1dsj]

Re: Any Yamaha SG/SBG experts out there?

Contact Yamaha as they are making SG's again.

 

[the guy who invented fire]

Re: Any Yamaha SG/SBG experts out there?

I don't think that the reissues are the same size but they might be. Contact Yamaha but good luck...they are a pain in the neck to get a hold of.

Best bet is to scour eBay...

Or, and this takes a little work but can be done...find a metal shop, have a new block made and have it drilled for a different bridge and then use that bridge...

That said, this is a whole lot easier and in the end will cost less...

http://www.ebay.com/itm/70s-Vintage...624?pt=LH_DefaultDomain_0&hash=item5402b399d8

 

[revolution]

Re: Any Yamaha SG/SBG experts out there?

I don't think that the reissues are the same size but they might be. Contact Yamaha but good luck...they are a pain in the neck to get a hold of.

Best bet is to scour eBay...

Or, and this takes a little work but can be done...find a metal shop, have a new block made and have it drilled for a different bridge and then use that bridge...

That said, this is a whole lot easier and in the end will cost less...

http://www.ebay.com/itm/70s-Vintage...624?pt=LH_DefaultDomain_0&hash=item5402b399d8

I got the brass block, i need tune-o-matic and tailpiece. Thanks for this.