Rich_S
HomeGrownToneBrewologist
Cleaning out the workshop...
I have this Eminence 12" speaker that I've kept on hand for workbench amp testing, etc. It's an inauspicious OEM model; not one of the better-known Patriot/Redcoat. Impedance is 8 ohms. It's probably a pretty clean, flat-sounding speaker, since it was built and labeled for Line 6. Based on its model number 11-20-1202, Eminence tech support was able to send me specs a few years ago, but I've long since lost the e-mail.
It's in good shape and working fine. It has one cone tear, about 1 1/2", which was repaired satisfactorily by a previous owner. I'm sure the repair has no tonal or reliability effects, but it's obviously there - dude used his girlfriend's purple nailpolish for the patch. (OK, I suppose it could have been the dude's purple nailpolish. Who knows?)
Nothin' special, but if anybody needs a spare 12" around... $15 plus shipping to your location. (Figure another $12 or $15 in the CONUS.)
I have this Eminence 12" speaker that I've kept on hand for workbench amp testing, etc. It's an inauspicious OEM model; not one of the better-known Patriot/Redcoat. Impedance is 8 ohms. It's probably a pretty clean, flat-sounding speaker, since it was built and labeled for Line 6. Based on its model number 11-20-1202, Eminence tech support was able to send me specs a few years ago, but I've long since lost the e-mail.
It's in good shape and working fine. It has one cone tear, about 1 1/2", which was repaired satisfactorily by a previous owner. I'm sure the repair has no tonal or reliability effects, but it's obviously there - dude used his girlfriend's purple nailpolish for the patch. (OK, I suppose it could have been the dude's purple nailpolish. Who knows?)
Nothin' special, but if anybody needs a spare 12" around... $15 plus shipping to your location. (Figure another $12 or $15 in the CONUS.)
Last edited:
