Ok, last night I tried the series/split/parallel with the invader/Dimarzio. It's not working, (I know I have neck pup, and maybe 1 coil on the invader, but no bridge position at all (very low volume, almost none.) I believe my problem lies in the 3 lugs at the bottom of the pot. I wired it as per your diagram. Question: (probably a dumb one) where does the out(black) wire go, and on the 3 lugs, the middle one goes to one side of the 3 way, the right one is soldered to the pot, what about the left one. On the other push pull, the neck pup white wire is on the left bottom lug, the plain to ground (on the side of the pot) and the right goes to the back side of the 3 way. The jack hot goes to the middle of the 3 way and the plain goes to the pot (ground). I think I am going to rip all of this out and clean everything up and start from scratch. What am I missing? Thanks mucho.
Mike
Mike
