Ash body, maple neck and fretboard with JB bridge and what P90 neck pickup?

[esandes]

Swamp ash. What P90 neck would pair up well with a JB bridge? The volume and tone pots are 500k.

The antiquity but waxed or the vintage but with A2 mags are on my radar. I'm set on A2s(*). What other mods for a custom shop P90 would compliment the mighty JB when played in parallel?

(*)I'm also open to suggestions on the mags. I like the sound of A5 rods in a neck single coil and I like the sound of A2 HBs neck and bridge. Yes the JB is A5 but it cleans up so well with non master volume amps and no pedals. A clean boost and wah are all I use.

 

[Clint 55]

Any of them. I would go Phat Cat cuz it's easier to deal with, plus it's almost noiseless since it's completely shielded. Sounds great with a JB.

 

[Mincer]

I'd try a stock Antiquity first, which may be the best sounding P90 I've ever heard. It is also a very dynamic pickup across many different levels of gain.

 

[Lewguitar]

I'd be tempted to put a Duncan Antiquity Mini-Humbucker in there. The one mounted in a P90 size. Those are alnico 2

Or one like Brent Mason uses:

 

[Lucius Paisley]

Just wait until they put out the P91. I mean, it's been forever since the P90 was made, it has to be soon.

 

[GuitarStv]

Just wait until they put out the P91. I mean, it's been forever since the P90 was made, it has to be soon.

http://Emgpickups.com/P91.html

 

[Lucius Paisley]

http://Emgpickups.com/P91.html

Quite soon.