Axess BS2 Buffer/Splitter... NICE!!

[Guitarist]

Well, this pedal has restored HUGE amounts of top end and my tone is shimmering!! A special thanks to screamingdaisy and the_Chris for their recommendations of this pedal.

If you are suffering from long cable runs sucking the life out of your tone, check this pedal out!!

http://www.axess-electronics.com/

 

[B2D]

Re: Axess BS2 Buffer/Splitter... NICE!!

How was it for restoring lows and mids?

 

[That90'sGuy]

Re: Axess BS2 Buffer/Splitter... NICE!!

How was it for restoring lows and mids?

You don't lose lows and mids from high capacitance cable and long cable runs, it rolls off the highs. The Axess buffer only restores that topend and strengthens your signal, it's not an enhancer of any kind like the BBE Sonic Maximizer.

I'd have one if I didn't have my Demeter Tremulator, which is a low output buffer itself.

Glad to hear it's working out for you Guitarist.

 

[B2D]

Re: Axess BS2 Buffer/Splitter... NICE!!

You don't lose lows and mids from high capacitance cable and long cable runs, it rolls off the highs. The Axess buffer only restores that topend and strengthens your signal, it's not an enhancer of any kind like the BBE Sonic Maximizer.

I'd have one if I didn't have my Demeter Tremulator, which is a low output buffer itself.

Glad to hear it's working out for you Guitarist.

I don't lose as mich high end as I would think from running through 5 pedals and a combine 45 ft of cable, but it seems like the midrange and bass integrity and impact is affected somewhat. Maybe a Valvulator would work better for me?

 

[Vasshu the humanoid typhoon]

Re: Axess BS2 Buffer/Splitter... NICE!!

You alway loose what milivolt there is left.....so it affects it all.
TB is marvelous.

 

[B2D]

Re: Axess BS2 Buffer/Splitter... NICE!!

You alway loose what milivolt there is left.....so it affects it all.
TB is marvelous.

Huh?

 

[Vasshu the humanoid typhoon]

Re: Axess BS2 Buffer/Splitter... NICE!!

Being sarcastic.

 

[B2D]

Re: Axess BS2 Buffer/Splitter... NICE!!

Oh i gotcha... i thought you were saying that theres always going to be SOME signal loss (true) and that TB (the military acronym for tri-ethyl borane) is marvelous.

But that didnt really make sense as TB is normally used for starting the engines of the SR71 Blackbird spy plane and blowing large holes in the sides of mountains.

I don't mind a little signal loss but I'd like to keep most of it intact without too much fuss.

 

[Vasshu the humanoid typhoon]

Re: Axess BS2 Buffer/Splitter... NICE!!

Ah ok..hehe Blackbird bypass is a new trend now...fire it up
I on the other hand do not like signaldegredation much, I want that fat punch as intact as possible, I can always get the sound I want, but the flat dead signal bugs me.