brisk
NeverLostologist
Just to let you know ...
[font=Verdana, Arial, Helvetica, sans-serif]Guitarists and bassists have been demanding a foot pedal version of the legendary BBE Sonic Maximizer and the wait is finally over![/font]
[font=Verdana, Arial, Helvetica, sans-serif]Many musicians don't have a spot for the rack mount unit, but long for the legendary clarity, definition and punch that only a Sonic Maximizer can provide. BBE took heed and carefully designed the Sonic Stomp foot pedal which delivers the same amazing sonic improvement as our popular 482i Sonic Maximizer.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Other features include hard-wire bypass, non-slip rubber bottom, easy-access 9v battery compartment and
included external power supply. [/font]
[font=Verdana, Arial, Helvetica, sans-serif]Sonic Stomp Specifications:
Frequency Response: Program Dependent
BBE: Lo Contour +12dB @ 50Hz
Process +12dB @ 10kHz
Signal to Noise Ratio: BBE on Max 94dB
BBE on Min 104dB
THD: 0.02% at 1kHz
Noise: BBE on Max -87dBu
BBE on Min -97dBu
Max Signal Level +7dBu
Input Impedance: 1MEG Ohms
Output Impedance: 1K Ohm
* 0dBu = 0.775Vrms
Hardware Bypass: YES
Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 15 hours[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Guitarists and bassists have been demanding a foot pedal version of the legendary BBE Sonic Maximizer and the wait is finally over![/font]
[font=Verdana, Arial, Helvetica, sans-serif]Many musicians don't have a spot for the rack mount unit, but long for the legendary clarity, definition and punch that only a Sonic Maximizer can provide. BBE took heed and carefully designed the Sonic Stomp foot pedal which delivers the same amazing sonic improvement as our popular 482i Sonic Maximizer.[/font]
[font=Verdana, Arial, Helvetica, sans-serif]Other features include hard-wire bypass, non-slip rubber bottom, easy-access 9v battery compartment and
included external power supply. [/font]
[font=Verdana, Arial, Helvetica, sans-serif]Sonic Stomp Specifications:
Frequency Response: Program Dependent
BBE: Lo Contour +12dB @ 50Hz
Process +12dB @ 10kHz
Signal to Noise Ratio: BBE on Max 94dB
BBE on Min 104dB
THD: 0.02% at 1kHz
Noise: BBE on Max -87dBu
BBE on Min -97dBu
Max Signal Level +7dBu
Input Impedance: 1MEG Ohms
Output Impedance: 1K Ohm
* 0dBu = 0.775Vrms
Hardware Bypass: YES
Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 15 hours[/font]