Behringer Mixers
- Thread starter Biu
- Start date
Jeff_H
Dean Hardtail Fanologist
Re: Behringer Mixers
I used a Behringer mixer (non-powered) when I played with my group of guys in Denver. They are solid unit for the money. I would not hesitate to buy another one of their products. I also always heard nothing but good things about their products.
I used a Behringer mixer (non-powered) when I played with my group of guys in Denver. They are solid unit for the money. I would not hesitate to buy another one of their products. I also always heard nothing but good things about their products.
Blue Calx
Squackman
Re: Behringer Mixers
In my experience, I've found Behringer to make crap crap products... then again, my old job invested in mostly high end gear, so I'm spoiled! If it's in your price range, mr Biu, I'd say go for it - 600 watts should do you just nicely (250 worked for a tiny bar once for me).
In my experience, I've found Behringer to make crap crap products... then again, my old job invested in mostly high end gear, so I'm spoiled! If it's in your price range, mr Biu, I'd say go for it - 600 watts should do you just nicely (250 worked for a tiny bar once for me).
Blue Calx
Squackman
Re: Behringer Mixers
and if it's powered, AND it's a lower end board, there might be a chance that there's no individual outputs for each channel (line-level) on the back... There may be a monitor output on the thing, and you could route that to a recorder, but it'd only be the sum of everything mixed together and possibly in stereo - you wouldn't have individual control in your recorder. whatever you do, DO NOT plug any powered output into your recorder!
and if it's powered, AND it's a lower end board, there might be a chance that there's no individual outputs for each channel (line-level) on the back... There may be a monitor output on the thing, and you could route that to a recorder, but it'd only be the sum of everything mixed together and possibly in stereo - you wouldn't have individual control in your recorder. whatever you do, DO NOT plug any powered output into your recorder!
Artie
Peaveyologist
Re: Behringer Mixers
Hey Biu; I'm far from being an "expert" in pro-audio, but I do have several years experinece in that field. If it was me, I'ld keep "mixing" and "amplification" jobs separate. If mounted properly in a good rack-mount system, they effectively become one unit for carrying purposes, but you still have the versatility of changing/upgrading amps. (and mixers)
And, more importantly, if an amp goes south on you, you can pop it out and have it fixed most anywhere, whereas some shops will be scared off by a big mixer/amp combo.
Use whatever mixer you get with a new or used Crown amp, and you'll have a reliable bullet-proof system.
Just my 2-cents worth.
Hey Biu; I'm far from being an "expert" in pro-audio, but I do have several years experinece in that field. If it was me, I'ld keep "mixing" and "amplification" jobs separate. If mounted properly in a good rack-mount system, they effectively become one unit for carrying purposes, but you still have the versatility of changing/upgrading amps. (and mixers)
And, more importantly, if an amp goes south on you, you can pop it out and have it fixed most anywhere, whereas some shops will be scared off by a big mixer/amp combo.
Use whatever mixer you get with a new or used Crown amp, and you'll have a reliable bullet-proof system.
Just my 2-cents worth.
Hellion
New member
Re: Behringer Mixers
I've never used their mixers (I like Mackie for live work), but I do own a couple of their compressors, a crossover and an eq. They all work fine for live, and they're a bit more rugged than some of the other compressors and crossovers that I've used. I don't think I'd use any of them in the studio, though. They're just not clean enough.
I've never used their mixers (I like Mackie for live work), but I do own a couple of their compressors, a crossover and an eq. They all work fine for live, and they're a bit more rugged than some of the other compressors and crossovers that I've used. I don't think I'd use any of them in the studio, though. They're just not clean enough.
Ken
PlayingWithDollsologist
Re: Behringer Mixers
Firstly, I've been spoiled. The gigs I've gone out on have used Crest, Allan and Heath, and Midas boards. A Behringer would have serious penis envy next to any of those...
Ehhh...they're good based on price...but a good board is worth it's weight. Behringer are notorious for ripping off competitor's designs and using cheap (and unreliable) components. I'd at least get a Mackie (and even those can be hit or miss...).
Firstly, I've been spoiled. The gigs I've gone out on have used Crest, Allan and Heath, and Midas boards. A Behringer would have serious penis envy next to any of those...
Ehhh...they're good based on price...but a good board is worth it's weight. Behringer are notorious for ripping off competitor's designs and using cheap (and unreliable) components. I'd at least get a Mackie (and even those can be hit or miss...).
Gearjoneser
Gear Ho
Re: Behringer Mixers
I agree with Artie. Behringer makes a living by copying Mackie's designs and having the stuff mass produced in China. Some of it's good, some not so good. It's better to keep the components isolated and not buy 'do it all' systems. He's right. Buy a Behringer non-powered mixer and then find a good, cheap power amp like a Crown, Crest, or even Peavey. I have a Behringer mixer for my PA system. Never had a problem, but I've blown up my sh!tty Carvin DCM 1000 power amp 2 times! I'm done with Carvin, but Behringer has proven themselves to make a decent product at a dirt cheap price.
I agree with Artie. Behringer makes a living by copying Mackie's designs and having the stuff mass produced in China. Some of it's good, some not so good. It's better to keep the components isolated and not buy 'do it all' systems. He's right. Buy a Behringer non-powered mixer and then find a good, cheap power amp like a Crown, Crest, or even Peavey. I have a Behringer mixer for my PA system. Never had a problem, but I've blown up my sh!tty Carvin DCM 1000 power amp 2 times! I'm done with Carvin, but Behringer has proven themselves to make a decent product at a dirt cheap price.
Gearjoneser
Gear Ho
Re: Behringer Mixers
I'm not sure of the model, but it's an 8 channel rackmount mixer with big side mounting brackets. I just use it to mix vocals in a rehearsal room. Never had one problem with it.
I'm not sure of the model, but it's an 8 channel rackmount mixer with big side mounting brackets. I just use it to mix vocals in a rehearsal room. Never had one problem with it.
