best pot for a spin-a-split?

totergecko

New member
I have a strat with hot rails and right now am using a one meg audio taper pot as a spin-a-split. I know with tone and volume controls, audio taper gives a more graduated response since we hear frequency on a logarithmic scale...but since the spin-a-split is actually making subtle adjustments in output, I thought maybe a linear 250k pot might give easier, more gradual control of the output. also I am def gonna go with a no load pot when I replace it. I would have already but it is nearly impossible to find one meg no load pots. but yeah. thoughts, anyone?
 
Re: best pot for a spin-a-split?

just ordered one of those myself:P seems like it should give a nice workable range when I use it.
 
Re: best pot for a spin-a-split?

Years ago when the spin-a-split surfaced, I found a REVERSE audio taper 1M pot that works great. From 0-5 it's a tone control. From 6-10 it's doing the split. It allow fine tuning the balance of the coils. 500k would probably work too. ;)
 
Re: best pot for a spin-a-split?

I use a 500k audio taper to spin-a-split a Dimebucker. It sounds great in mohogany. Below about 6 the tone thins out a bit, a tiny bit of single coil hum and top end sweetness come through. From 6-10 it very slightly mellows the tone.

I haven't tried any other potentiometer values. I pretty much went with 500k since that is what the neck & bridge volume pots were in that guitar.
 
Re: best pot for a spin-a-split?

Oh, and just a note since some think the Dimebucker is fairly bright, the mohogany body & rosewood fretboard tend to keep the high end mellow. When I use the spin-a-split, using the Dimebucker and Alnico II pro together gives sweet high end and adds some round mid & low content back into the signal. Granted, it is in a Washburn Dime 333, so I was trying to get a tone similar to the Pantera song 10's, a kinda molten, backed off distortion sound.

Anyhow, the combination of the high output bright pickup, mohogany body, and coil split really works well with the plain 500k audio taper pot...
 
Back
Top