Blackout modular pre
- Thread starter nsatke
- Start date
lostinthemasses
New member
Re: Blackout modular pre
You could do it on a dual circuit at the very least.
You could do it on a dual circuit at the very least.
frankfalbo
In Fluence Y'all
Re: Blackout modular pre
Yes you can use the modular preamp on the passive, and that'll mix just fine with a Blackout. The only concern would be if its out of phase, which you'll hear immediately in the in between position. Good news is if that's the case the screw terminals on the BMP-1 allow you to just swap the wires around at will.
Yes you can use the modular preamp on the passive, and that'll mix just fine with a Blackout. The only concern would be if its out of phase, which you'll hear immediately in the in between position. Good news is if that's the case the screw terminals on the BMP-1 allow you to just swap the wires around at will.
