blackouts metal wiring question

T

therottingsun

New member
does anyone have a scematic of how to wire the blackouts metal pickup between normal and boosted (jumper on/off) to a two way switch?
 
Re: blackouts metal wiring question

Well, just look at that jumper. It simply connects the two pins together. So you'd solder a couple wires to it, tape it off, and then run those wires out to a switch. Any switch would do. You can take any mini-toggle and use it to jump the wires together.
 
Re: blackouts metal wiring question

therottingsun said:
does anyone have a scematic of how to wire the blackouts metal pickup between normal and boosted (jumper on/off) to a two way switch?
Click to expand...


All you need to do is run a wire from one stud on the PuP to the bottom lug left side of your 2 way. The run another wire from the other log on your PuP to the bottom lug right side of your 2 way. Mission accomplished. Just did that to the BO single in my Jackson...
 
Re: blackouts metal wiring question

therottingsun said:
my two way has 6 lugs? i am confused?....:banghead:
Click to expand...


Mine did 2...

Just use the middle lugs. But first...google 2 way mini switch, and you'll see some cool explanations of how they work. Its not as straight forward as you might think...
 
You must log in or register to reply here.
Back
Top