Blower siwtch + Killswitch wiring??

[jacksen]

I installed this blower switch according to this link
http://www.seymourduncan.com/blog/t...st-want-to-get-a-bit-more-out-of-your-pickup/

now..is that possible that I add a killswitch using SPDT 2 way??
if yes..show me how please...

Many thanks before o

 

[koshikas]

Re: Blower siwtch + Killswitch wiring??

i m assuming you are having a master volume and tone type guitar electronics in your guitar.

kill switches, simply short the hot and ground wires going to the output jack to 'kill signal'. there are two camps of kills switch employers. some favor momentary push button switches, others favor toggle switches like a SPDT. its that simple

 

[jacksen]

Re: Blower siwtch + Killswitch wiring??

i m assuming you are having a master volume and tone type guitar electronics in your guitar.

kill switches, simply short the hot and ground wires going to the output jack to 'kill signal'. there are two camps of kills switch employers. some favor momentary push button switches, others favor toggle switches like a SPDT. its that simple

I'm having a master volume,no tone pot,1 DPDT switch for 'blower'..how is the wiring to combine the 'blower' switch and the SPDT for killswitch??
I'm a noob :|

 

[Brandenburg]

Re: Blower siwtch + Killswitch wiring??

I'm having a master volume,no tone pot,1 DPDT switch for 'blower'..how is the wiring to combine the 'blower' switch and the SPDT for killswitch??
I'm a noob :|

Here is how I did mine.. Not too difficult


The kill switch is the the 1st thing after the output jack.. since you have a volume bypass (i.e. Blower mod).. like mine its probably easier to visualize.. Im using a dpdt.. BUT could of used a spdt. Had none available though..

 

[GuitarDoc]

Re: Blower siwtch + Killswitch wiring??

You really only need a SPST switch, but a SPDT will work. Connect the middle lug of the kill switch (the SPDT switch) to the wire from the blower switch that goes to the tip of the output jack. Connect one of the outer lugs of the kill switch to ground.

 

[jacksen]

Re: Blower siwtch + Killswitch wiring??

You really only need a SPST switch, but a SPDT will work. Connect the middle lug of the kill switch (the SPDT switch) to the wire from the blower switch that goes to the tip of the output jack. Connect one of the outer lugs of the kill switch to ground.

ohh it seems more simple than I thought
the other one of the outer lugs is not connected to anything??

 

[GuitarDoc]

Re: Blower siwtch + Killswitch wiring??

Correct. That's why a SPST switch would work just as well.