'Classic' series 70's strat neck question

T

TheGZeus

New member
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=41423&item=7326245344&rd=1&ssPageName=WDVW

I'm not buying oor sellign this, I'm just curious if the Classic 70s models usually have holes for 4 bolts.
Am I seeing this one right?

If they do, I could live with the neck on a standard(aesthetically unappealing) until I saved and got a 70s(or grabbed one off ebay like this one, and immediately checked the serial number to see if it was a stolen guitar) for the neck.

I just dig the 70s headstock for this project I'm doing and don't want to route a nice new guitar for humbuckers :(
 
Re: 'Classic' series 70's strat neck question

Im not sure I understand all your questions, but yes...a MIM 70's reissue has a 3 bolt neck with micro tilt as well as a bullet truss rod.
 
Re: 'Classic' series 70's strat neck question

No I mean, if you look at this one, it's got holes where I'd imagine the bolts for a 4 bold body would go.
I'm wodering if that's normal and if if that's truly what I'm seeing.
 
Re: 'Classic' series 70's strat neck question

TheGZeus said:
No I mean, if you look at this one, it's got holes where I'd imagine the bolts for a 4 bold body would go.
I'm wodering if that's normal and if if that's truly what I'm seeing.
Click to expand...


It does look like that, but like I said, the MIM 70's Strats are 3 bolt necks, maybe somebody had it on a 4 bolt body for a while
 
You must log in or register to reply here.
Back
Top